corrugated paper machinery

1. Basis Weight: 65g/sq.m.--250g/sq.m., 2. Working Speed: 150m/min--700m/min, 3. Daily Output:50t/d--500t/d - details see: https://www.machineto.com/corrugated-paper-machinery-10334038
Condition:NewProcessing Type:Paper MachinePlace of Origin:Liaoning China (Mainland)Brand Name:Tianshin
Model Number:CustomizedDimension(L*W*H):CustomizedCertification:ISO2000Basis Weight::65g/sq.m.--250g/sq.m.
Trimmed Width::1575mm--6000mmWorking Speed::150m/min--700m/minDaily Output::50t/d--500t/dDrive::AC Variable Frequency drive
Installation Type::SupervisionDesign Type::Project Design ServiceProduct Type:Paper Machine 
corrugated paper machinery
contact supplier for corrugated paper machinery


Corrugated Paper Making Machine

1. Wire Section Structure Drawing

2. Press Section Structure Drawing

3. Finished Section Structure Drawin

4. 4100mm-450m/min Corrugated Paper Machine Picture

5. 4300-400m/min Corrugated Paper Machine Picture

6. Press Section Picture of Corrugated Paper Machine

Corrugated Paper Machine

The single fourdrinier paper machineis usually used to make thehigh-strength and high quality corrugated paper. The twin wire paper machine(two fourdrinier wire)is used to make the higher quality paper.

The basic components of configuration are:wire section-- vacuum pickup device (optional) -- large-diameter press section -- dryer cylinder group -- size machine -- dryer cylinder group -- reeling machine.In order to improve finished paper uniformity and ring crush index, it uses twin wire.

Fourdrinier table lengthis usually between13m and 24m.(decided by working speed).

It can selectopen-typeheadbox when the working speed isless than the 250m/min;

Select theair-cushionedheadbox when the working speed ismore than 250m/min.

The dewatering componentsare usually uses thestainless steel vacuum suction box.Full ceramic girder or inserted ceramic girder.

It has two stages large-diameter press, top felt and bottom felt for dewatering. Cast iron rubber blind roll.

It usually has three kinds of diameter:Φ1250mm, Φ1350mm, Φ1500mm.The large diameter can improve press nip width, dewatering effect, wet sheet strength and finished paper density. It can use the vacuum pickup device according to the working speed when transfer the wet sheet.

It usually uses severaldryer cylinder groupswith the diameter ofΦ1500mm or Φ1800mm. drive: closed gear box each dryer group single drive or single gear box each dryer group multi-points drive.

When wet paper enters into dryer section, it can select different leading way and paper orientation according to PM working speed, production basis weight and pulp impurity.

The wetting sizecan increase about180%finished paper ring crush index. It can select horizontal pneumatic reeling machine or horizontal pope reeling machine according to the working speed.

Now we introduce the technical proposal and structural drawing of low basis weight but high quality, high-strength corrugated paper machine, which we made forBaishan Qixiang Paper Companyin Jinlin province, China. Their high quality and high-strength corrugated paper is the famous brand in China corrugated paper industry; we have only 2.5 hours drive to the company.

Thattrimmed widthis4400mm,the paperbasis weightis80~180g/sq.m.Theworking speedcan reach to400m/min. It uses the twin wire; the length of bottom wire is23.5m, the length of top wire is7.7m.It can select the single fourdrinier or twin wire according to the different actual needs.

It uses theair-cushion headbox, the vacuum suction boxwith stainless steel full ceramic girder. Two stages large-diameter double felt four blind rolls press independently. The roll diameter isΦ1500mm. There has one vacuum pickup device to strip the paper sheet from the wire section to the press section.

There are38 (1~38) dryer cylinderswith the diameter ofΦ1800mm.The first and the second group have seven dryer cylinders with groove on the surface(U1~U7),the diameter isΦ1500mm.(UNO cylinder).

The leading typeis single cylinder on-feed, the sheet moves toward outside of U1~ U7 cylinders felt surface. This structure can decrease the wet paper sheet breaking; wipe off the impurity on the surface and improve the quality of finished paper.

Drive type:each dryer cylinder group multi-points drive. It has no gear mutual-meshing, which is different from the closed gear box single-point drive. By this way, the noise can be reduced and maintenance become easily.

The continuouswetting sizeon line can increase finished paper ring crush index.Horizontal pope reeling machine, displace roller easily.

Drive:ABB digital VVVF sectional dive.

We’ll be happy to give you the competitive quotation upon receipt of your detailed requirements.

...

corrugated paper machinery
Packaging Detail:Wood Packing
Delivery Detail:6-8 months

Related Product for corrugated paper machinery