Convenient SL-710 Cement Mortar Spray & grout pump for waterproofing

1. Spraying & grouting machine,, 2. Used for groutimg or spraying PU, resin or other waterproof &leakage stoppage - details see: https://www.machineto.com/convenient-sl-710-cement-mortar-spray-grout-pump-for-waterproofing-10110821

Place of Origin:Shanghai China (Mainland)	Brand Name:Shenglong	Model Number:SL-710	Power:0.75KW/380V
Applicable materials:JS waterproof material, Cement Mortar,PU material	Usage:Spray & grout	Rate of flow:1-15L(L/Min)	Particulate of material:less than 3mm
Pressure:30KG	Rotate speed:0-1300(rpm)	Color:Green	Weight:58kg
Packing size:9506201350MM

Product Description

With advanced design, it is used for groutimg or spraying PU, resin or other waterproof &leakage stoppage

Spray operational rules

1. Before starting, add fresh water into the hopper and regulate the speed to the middle-high speed in order to achieve the effect of wetting pipe, only a short running and then draining the water.

2. Putting the even material stirred into the hopper, and then locking pulp exit of main machine and the pipe & nozzle.

3. Before spraying, filling the pressure of air compressor to 8kg (matched air compressor 0.26-0.36m) and then connected to the nozzle.

4. After connecting to power, putting the gunpoint aiming the hopper, adjusting the air pressure and the speed until achieving the best state of fogging, shutting down the machine but non-stop wind.

5. After the accurate Debug, immediately move the nozzle and spray jets to the construction site work.

6. During the construction process, the pipe is filled with paints, not suitable for parking too long. If the power is failure, you should immediately dismantle the pipe to clean.

7. If filling pressure in the pipe, before dismantling & cleaning, you must put the cloth on it to protect your eyes, avoiding injury.

8. If starting the machine fails, first check whether the fire drills is broken or not and should replace it immediately.

9. Cleaning the body during the working or completion, making sure no wetting the electric drill & box, avoiding damage.

10. After completion of working, must clean up the hoppers, pipes, nozzles, and rotary joints so as to work tomorrow

11. If detecting the exit of coating is weak power after a long time to work, you have to replace the pressure pump.

12. If it suddenly appears without feeding material in the work, while motor is still working, it proves that the nozzle has been plugged. You should immediately stop working and clean the nozzle, and then continue to work.

13. The nozzle is damageable (including the pressure pump). The standard nozzle pore is 4mm. When the fogging of nozzle is not satisfactory, you should immediately replace the nozzle.

Contact Person: Lesley
Mobile:+86-15800973518
Tel: +86-21-51860079-814
Fax: +86-21-6806 0355