Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Carbonization Stove

charcoal kiln for sale, 1.Large productivity., 2.Long life-span., 3.High charcoal making ratio - details see: https://www.machineto.com/continuous-charcoal-carbonization-kiln-for-sale-10340972

Continuous charcoal carbonization kiln for sale

Introduction

Charcoal stove take high-tech purification technique, special high temperature resistant steel into precious metal, durable, not deformation, oxidation, insulation performance is good, the operation is simple, safe and reliable, double tube chimney no carbonized blind Angle.

Technical parameters of charcoal stove :

Model	Power(kw)	Output(kg/day)	Volume(cube)	Dimension(mm)	Weight(Kg)
THL-4	1.5	800-1000	4	2300*1700*2000	4000
THL-6	1.5	1000-1500	6	3000*1700*2000	5000
THL-8	1.5	2000-3000	8	3300*2000*2200	6000

Main datas of the charcoal:

Moisture	Charcoal content	Ash content	Combustion time	Heating value	Volatilize content	Combustion temperature
0.98%	83.28%	3.68%	200min/kg	7.9kcal/kg	6.68%	880°C

Working principle:

1.Charcoal Stove to gas furnace for heat-grown, use of methane gas through the cyclone, with air into the burner. Combustor outlet temperature can reach to 800°C ~ 1200°C, the flow rate up to 3 to 5 meters per second, resulting in high temperature air in the combustion chamber external heating.

2.Note: during heating, furnace temperature at100 °C ~ 150 °Cmaximum humidity when the furnace, per kilogram of fuel rods into the kiln, the into4 ~ 8%water, 1700kg of raw materials can be brought more than 100 kg of water, the water were is the enemy of carbonization.
3.Because charcoal fuel rods fear damp, wet or crushed into powder, seriously affected the quality of carbonization, so the system is essential tide row key, behind tide time 1 ~ 1.5 hours.
4.When the carbonization chamber furnace temperature rose to 300 °C, the furnace produced a large number of combustible gases. In theory, per kilogram of raw materials can produce 3 cubic methane gas, the gas temperature for carbonization, drying heat source to use, free to adjust the level of furnace temperature, low temperature carbon is generally more than 400 °C (8 hours to complete), high temperature carbon above 600 °C (10 hours to complete).