Home  >  Food & Beverage Processing Machinery  >  Food & Beverage Machinery  >  Fryer

Continuous Breaded Food Fryer, 1. High Fuel Efficiency, 2. Scraper and coarse particle screener., 3. CIP System., 4. Whole SUS30 - details see: https://www.machineto.com/continuous-breaded-food-fryer-10038223

Continuous Pellet Fryer

HOLA COOK EASY FRYER <easy operate, easy maintenance, easy clean>

HOLA COOK EASY FRYER, type EF, is deep fry food in hot oil in an optimal way with ahigh-fuel-efficiency direct heating system. The food runs continuously on the belt conveyor through heated oil to get gently fried. The oil temperature and frying time are both adjustable in HOLA FRYER. HOLA COOK EASH FRYER is designed to match the B-Shaped Frying Theory (*1). Via HOLA Unique Heating Tube design, the oil temperatures in input and output area are slightly higher than in the middle. Therefore, the product surface is hardened as fast as possible so that its original taste will remain in the food in the beginning stage. Next, at a little bit lower temperature, product is fried in comparatively longer time than the former stage. This is to increase the core temperature sufficiently to sterilization level. At last stage, it applies a higher temperature to take as much oil as possible out of products.

Besides, from the scientific frying theory, new oil turnover rate is the key point. All HOLA FRYERs are designed to obtain as less oil in the tank as possible, so the oil can keep a certain level of freshness. As a result, an appetizing and well fried food comes out.

Heating: Air heating chamber is under the frying tank. The heated air is delivered to frying tank via HOLA COOK Special tubing System in the frying tank. By increasing the heating surface, HOLA COOK EASY FRYER can increase the fuel efficiency drastically.

Apart from heating, HOLA COOK EASY FRYER also has continuously sweeper which can remove the bottom particle out of fryer during the frying time. It can minimize the overcooked remaining particle in the frying tank. Besides, one filter is equipped before the oil circulating pump to prevent pump chocked.

Advantage:

1. Whole set is waterproof and can be washed with water directly.
2. Minimize Horizontal Area of machine. Reduce scale and dust attaching in the machine.
3. Conveyor can be lifted up mechanically. Easy to clean.
4. Continuous sweeper to remove the sink particle from the frying tank.
5. Minimize the oil amount.
6. Mechanical conveyor lifting up system.
7. Close Type construction, clean working environment.
8. CIP System
9. With Flameproof safety design.
10. Two Step Gas Burner to ensure good temperature control. (Diesel Burner is available upon request.)
11. Inverter controller for frying time.
12. Emergency Stop and Protection for over-temperature, burner abnormal.

Optional:

1. Portioned Burner (for temperature-sensitive product)
2. Circular Continuous filter, mesh 0.5mm – 3mm
3. Tempura Conveyor
4. Belt Type continuous filter, 50 micron.
5. Used Oil Discharge Pump.

Customer Self-Prepared:

1. Air Exhaust Air Pipe
2. Cabling with main power.
3. New Oil Tank and piping with fryer

Machine Spec:

1. Machine Overall Size: 3156 (L) * 1622mm (W) * 1760mm (H)

2. Frying Space: 2275mm (L) * 820mm (W)

3. Heating Capacity:200,000 Kcal/Hr

4. Frying Time: Can be designed according to customer's request.

5. Frying temperature: ambient temperature to 220 C Degree.

6. Heating Souce: Gas, or Diesel or Electricity.