Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Flash Drying Equipment

Quick and easy maintenance are the distinctive feature for air drying machine.Credible quality and the ability to store heat. - details see: https://www.machineto.com/configuring-heat-preservation-on-the-flash-drying-equipment-10290056

The flash drying equipment contain : Hot stove - feeding airlock - Combination drying tube - Cyclone - Draught fan.

1.The flash drying equipmentBrief Description

Airflow type Dryer is easy operation, high efficiency and easily control of sawdust drying degree.

Hot airflow type drier, also called pipeline type drier, high hot airflow speed, fully mixing of airflow and materials, big drying strength, lower dust and bigger drying capacity.

Moisture in the raw materials of less than 40% can be drying one time to meet the requirement for coal bar production.

For raw materials with heavy humidity which is above 12%, you need to install a dryer before further processing. This Air Current Type dryer can reduce the humidity of wood materials below 12% per time. The Cost of this Air Current dryer is much lower than Rotary dryer. It is professionally designed for drying different kinds of wood sawdust. It has advantages of low cost, low consumption, high capacity, easy operation and maintenance, etc. In addition, the round places of pipes can be changed to any angle which can save space and solve plant dimension limitation.

Airflow type Sawdust Dryer is easy operation, high efficiency and easily control of sawdust drying degree.

Hot airflow type drier, also called pipeline type drier, high hot airflow speed, fully mixing of airflow and materials, big drying strength, lower dust and bigger drying capacity.

Moisture in the raw materials of less than 40% can be drying one time to meet the requirement for coal bar production.

2.The flash drying equipment Selection methods and technical parameters.

1. It is suitable for drying materials of moisture 20-70%.

2. It is suitable for drying materials like sawdust, rice hull, milling wheat straw, corn stalks and so on.

3. It is equipped with two fuel boilers, inlet, steel pipe, exhaust blower (fan), air lock and cyclone. Wet materials are input into the hopper.

4. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are discharged from the outlet with air lock.

5. It reduces the moisture to 8-12%.

6. Clients can change the angle of dryer base on the production field.

7. It is only to control the moisture of raw material at a reasonable range that can make good result of biomass briquettes. Or the briquettes will be broken because of too loose or too dry.

3.The flash drying equipmentphoto Gallery

4. If you are interested in our products, please contact us.

ADD: Room 503, No.1 Building, Dream Yard,

High-Tech Zone, Jinan, Shandong Province, CHINA.

TEL/FAX: +86 531 62318650

Mob:+86 18660178578

Skype: chinasharegroup

Http: www.jnshare. com