Home  >  Construction Machinery  >  Building Material Machinery  >  Floorboard Making Machinery

Concrete flooring slab machine, 1.smooth surface,strong strength, 2.fast moulding speed 1.2-1.4m/min, 3.easy to maitain and repa - details see: https://www.machineto.com/concrete-flooring-slab-machine-tw100-600-10078445

TW100*600 concrete paving slab machine

1.Introduction:

This pushing type prestressed concrete forming machine applies the technology of pushing long line to producehollow core or solid floor slabsconsecutively. The length can be cut as per the special construction design. With low labor force, high efficiency, neat appearance,accurate dimension and high intensity, the products satisfied the related technical requirements.

2.Technical parameters:

Thickness of Slab: 100mm
Width of Slab: 600mm
Length of Slab: 4m
Capacity: 1.2-1.4m/min
Main Power: 4KW
Vibration Power: 1.5KW

3.Types available:

TW120*600/900/1200

TW50*500/TW100*600

4.Machine Maintenance

1)To clean the residual concrete on the key parts, such as the bottom of the vibration, the bottom of the planishing panel, dabber, side moudling board, vibration four corners everyday.

2)To add lubricant. Note: no lubricant add to the rubber washer.

3)If the machine works for three monthes (working time), the speed reducer should be cleaned and lubricated. Also, it is also need to change the lubricant for the machine with less than three real work monthes every two year.

4)To check the engine oil volume regularly.

5)The oil of the speed reducer is 20# gear compound but not other oil.

6)To check all the fasteners every shift.

7)To change the parts of the forming machine in time. For example, the tooling sunks for 2-3mm.

8)The deviation of the vibration foot cap and the central of vibration upright is beyond 5mm, please change rubber on time.