Home  >  Mining & Metallurgy Machinery  >  Mining Machinery Parts

DTH hammer and DTH bits, 1.Working pressure:5-12bar, 2.Air consumption:5-10m^3/min, 3.Outside diameter:80mm - details see: https://www.machineto.com/comparable-cop64-atlas-copco-dth-bits-and-dth-hammer-10316839

High and Low-medium pressure DTH hammer

Hammer length without bit(mm):758

Thread:T48*10*2

Outside diameter(mm):80

Wrench flat(mm):60

Weight(kg):21.5

Working pressure(bar):5-12

Air consumption(m^3/min):5-10

Instroction

DTH is abbreviation for "down the hole" . Low Air Pressure Down The Hole Drill Bit (DTH Button Drill Bit) is used to produce large-diameter holes in rocks, usually in the initial stage prior to blasting, but it is also used in non-blasting applications. DTH drilling are used mostly in mining quarries but can be used in a variety of other constrauction applications. The DTH drilling method is growing in popularity, with increases in all application segments, including blast-hole, water well, foundation, oil & gas, cooling systems and drilling for heat exchange pumps. Applications were later found for the DTH method underground, where the direction of drilling is generally upwards instead of downwards.

Specification

High pressure down-hole DTH hammer

2.5'' Hammer		GD2.5
3.5'' Hammer		GD3.5
		HCD34
		XF-3.5N
4'' Hammer		GD340
		GQM.TD40
		GF340AN/XF-340N
		GF.MISSION40
5‘’ Hammer		GD350
		GQM.QL50
		GF350RN/XF-350N
		GN.MISSION50
		GF.QL50
6'' Hammer		GD360
		GQM.QL60
		GF360N/XF-360N
		GF.MISSION60
		GF.QL60
8'' Hammer		GD380
		GQM.QL80
		GF.QL80
		GF.MISSION80

Model	Length mm	Thread	Outside Dia.(mm)	Weight	Air consumption(Bar)	Wrench (mm)	Air consumption(L/S)
D84	1344	4 1/2"REG	182	190	6/25	148	420/780/875L/S
D64	1189	3 1/2“REG	137	98	6/25	95	175/345/480L/S
D54	1140	2 3/8”REG	124	75	6/25	74-95	145/261/348L/S
D44	979	2 3/8”REG	99	40	6/25	74	105/185/250L/S
D35	892	2 3/8”REG	80	25	6/25	65	90/170/220L/S
D24	868	F42*10*1.5	70	20	6/25	55	70/120/180L/S