Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Mine Drilling Rig

Drilling Rig Hydraulic DTH crawler-type,Drilling Rig DTH Crawler type,Hydraulic Drilling rig crawler-type - details see: https://www.machineto.com/compairs-zgyx-450-integrated-open-air-dth-drill-rig-down-the-hole-10313138

Drilling Rig Hydraulic DTH crawler-type,Drilling Rig DTH Crawler type,Hydraulic Drilling rig crawler-type

ZGYX-450 Integrated open-air DTH Drill Rig

ZGYX-450 Integrated Open-Air DTH Drill Rig

ZGYX-450 is an integrated Open-Air drill rig,designed and used for road construction,train construction,mine project and electric power project and so on.

Characteristic is below: High speed, low exhaust,climbing and moving strongly,low maintenance cost and maintain easily.

Features:

1,High power and compressed air make it possible for the drilling jumbo to drill quickily.

2,Heavy beams are installed in the oil tank, steel wire rope and pulley, and it forms the system of the hydraulic motor drives ; pair of a guy responding to locate , storing six five meters Φ 102 drill brazing position and the oil tank location, the rods and a pair of a brazed mechanical hand make the automatic system ; a thick with dust, sliding the dust cover, drill the threads of lubrication oil tank . the loading and unloading device of oil vat and so on .all above can meet the needs of high-speed drilling.

3,Extra motor and flat body makes it reach three kilometers an hour(max), 30 degrees(max), high and low speed walking function and warm device'of diesel engine make it adapt to various topographical terms and conditions of temperature.

4,Equipped with dual-stage air-conditioned cab handle all kinds of manipulation of light and flexible displays and a variety of instruments in the car all the data to reflect the drill and automatic alarm, storage, electronic Boom angle display makes the Drill single easy operation, accurate positioning.

5, Strong dust features make drill car could equip with 4 ,5 and 6 inch impactor to fit different consumer in different ways

Main Technologies Parameters and Setting

Hole Diameter: 115-152mm

Drill pipe size: 89/102mm×4M Drill rod: 89/102*3.4M

Drill rod exchange capacity: 6+1 Hole depth: 28M

Recommended Hammer: 4"or 5" Rotary speed: 0-105r/min

Rotary Torque: 4045N*M

Diesel Engine: Steyr D10.36T20

Rated Power At 2200rpm: 266KW Fuel tank Volume: 580L

Screw Air Compressor

Built-In air compressor:(made by ZG) Air End: Germany GHH---Ingersoll-Rand

Rated Work Pressure: 17bar Air Flow Capacity:18 m³/min

Boom

Boom type: Single-Straight Feed method: oil cylinder/steel wire rope-type

Feed Length Total: 8100mm Travel Length:4600mm

Feed Extend: 1200mm Max Feed Rate:0.88m/s

Feed Force,Max: 34.5KN Drawing force,Max:67.6KN

Horizontal hunting: -10°~ +30° Up and down the pitch:+1100mm -3100mm

Angular adjustment: 0~90° Pitching:-15°~ +90°

Oscillation angle: -5° ~ +90°

Carrier

Tramming speed,Max: 3km/h Driven Power:117.7KW

Climbing ability(Max): 25° Track oscillation:±10°

Ground Clearance: 420mm

Hydraulic system

Variable pump,Proportional valve assembly,Each action can be adjusted continuously;Hammer parameter integrated controlling system can be adjusted every time,to get high efficiency with low energy exhaust.

Electrical system

With real-time display, dynamic monitoring, fault diagnosis, operation interlock, maintenance tips,record and other features

Compressed air system

High/low pressure exchange automatically,air flow adjustment automatically

Dimension

Wide:2500mm Length:10260mm Height:2900mm

Weight(without option): 21000kg

Standard

Cabin is ROPS-and FOPS-approved and is equipped with Hydraulic pilot control joysticks

Automatic Drill pipe exchange assembly

Double hydraulic drill pipe support

Double speed moving motor

Dry dust collector assembly

Making hole through reducing pressure

Portable dust catch cover

Heavy track carrier

Tools and maintenance parts

Option

Automatic Anti-sticking device

Moisture dust collector(device)

Diesel Engine heating device

GPS Intelligentize Controlling system

Technical characteristic

The drill is set, liquid and gas, optical for in one integration. the "soft" connected to the comprehensive system. It own many functions such as steady , high speed, uphill capacity and efficiency, long usage life of the drilling devices , and low-consuming of energy, simple and have their own brethren, recovery, the protection, it can be applied to different circumstances, different areas, and there is a highly resilience to meet various users needs

The body internal configuration introduced