Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Drying Oven

Oven is constructed from reinforced to any shape depending on its range from mild steel plates of suitable thickness. - details see: https://www.machineto.com/commercial-oven-10289340

Axis ovenare generally used in the applications like drying, curing, moisture removal etc., these applications are wide and limited with the temperature of 60C to 350C.

Ovens are used in the areas like baking, de-waxing, blackening, electro plating, mould sand drying, garnet drying, mould drying, pre-heating etc.,

Oven is constructed from reinforced to any shape depending on its range from mild steel plates of suitable thickness and is supported with necessary stiffness.

All direct fired ovens are generating the heat by Electric supply. Ovens can be made suitable with 220V, 380V, 440V based on users’ requirement.

Indirect ovens can be fitted with Axis fuel efficient combustion system for the fuels like HSD, LDO, Furnace oil, PG, NG, LNG, CNG & LPG. Best fuel economy depends on the radiation and convection heat transfer of the combustion system. Therefore our design of oven with combustion system/ electric resistance coil will work as MDE FOR EACH OTHER to ensure its buyers

FULLEST SATISFACTION.

Product Name:Ovens

Technical Name:Oven, Drier, Paint drier, Sand Drier

Application: Sand Drying, Paint Drying, Core Drying, Moisture Removal, Mould Drying, Ingot Heating, and Ingot Mould Drying, Garnet Drying, Clay Drying, Fire Clay Curing, Refractory Curing, and Many More.

Product Description:A cubical shell drier, which is a customized design based on the applications, temperature requirement for these applications vary from 100C to 300C. Driers are also designed with Direct and Indirect type Driers. Drier is lined with Refractory and Insulation brick/ Glass wool insulations to hold the Temperature up to 600C. Driers will have two chambers in case of indirect type drier. The chambers are firing and Heating Chambers. If in case of Direct type drier, the re circulation fan must be used for the forced heat transfer.

Advantages:Our Furnaces are designed in such a way to reduce the Fuel Consumption. Our furnaces are lined with both refractory bricks and Ceramic fibre modules, in such a way to pass the flue Gas around the material to be heated, enabling high conduction convection and Radiation heat transfer. Combustion/Heating Equipments are designed to meet the requirements of furnace and Heat transfer rate. Burner will be positioned inclined to an angle, so that the flame/flue skips on the surface of the material. Better heat transfer rate through circulation and Re-circulation. Our furnaces are designed for skin temperature of 65C (Maximum).

Specialties:

Manual Operating Furnace.

Automatic Operating furnace.

Air/Fuel ratio Regulating System.

Mass Flow control System.

Pressure Balancing System.

Flue Control System.

Optional Accessories:Pre heating the scrap before charging can be done. Recuperator to pass the combustion into the Burner at a temperature of 150C (Minimum) for fuel saving upto 40%.

Heat Generated By:Light Oil/Heavy Oil/Furnace Oil/ Natural Gas/CNG/LPG/Propane/Butane/Bio Gas/Producer Gas.