Column swing lever type hoisting equipment JIB crane

BZ/BZD

Max.16m

3,6,9,12m

8,8/0.8,7,7/0.7,3.5,3.5/3.5

20,30

0.5r/min

360

Wirerope

6x37+FC

AC 380V,50HZ,3P

♥Technical parameter for swing lever type hoisting equipment

Overload stop device for hoisting;

Long bearing buffer for crane traveling;

Power failure back-up

by polyethylene woven bag.

position-limiter and connecting wire elt.

2.The operation voltage is usually 380V/36V,so please notify your

special required according to the marked direction on the switch

and control the hoist through the on-and-off of the relays in the control

box.

3.The circuit diagrams in this manual should be used together with

attached motor and electrical routes.

and electric device,etc.

to lift goods or materials.

2.It is prohibited to use the equipment in the combustible.

3.Its proper working temperature is -25°C to +40°C

2.All the crane are equipped with overload protection device.

3.Emergency stop system and so on.

2.Wheels are vacuum casting by ourselves,intermediate

frequency quenching.

3.Wheels,wire rope,drum,gears,coupling are manufactured by

our CNC machines.

4.Nanjing special or Nanjing Brand motor,top quality in China.

5.Eletrical equipments:Siemens or Schneider brand.

6.Control method:Cabin control,wireless remote control or

pendant control,You can choose two of them.

2.Lifting height:___m(hook center to ground)

3.Span length:___m(rail center to rail center)

4.Traveling distance?

5.Power supply:380V/50HZ is ok?

6.Would be better if you can send us workshop drawing.