Cold milling machine XM100/101

XM100/101, 1.for small area digging and milling, 2.high working efficiency, 3.milling width 1020mm, 4. max.travel speed 13km/h - details see: https://www.machineto.com/cold-milling-machine-xm100-101-10130443
Condition:NewPlace of Origin:China (Mainland)Model Number:XM100/101Rated power:115kw/154Hp
Use:Truck TrailerSize:4371*2294*3130mmType:Travel TrailerMaterial:Other
Cold milling machine XM100/101
contact supplier for Cold milling machine XM100/101


XM100/101 Cold milling machine

XM100 cold milling machine is the asphalt pavement maintenance and constructing machinery, mainly used for small area digging and milling of the highway, city road, airport, goods yard and parking lots and other bituminous concrete surface course, also it can be used for clean out the road surface bulge, bituminous waves, net, tracks, and also it can dig road surface groove and pits, also it can make cement concrete pavement stucco and milling surface layer faulting of slab ends.

This equipment has very high working efficiency and simple construction technique, the milling depth can be controlled easily, operation easy and simple. It has very good features, and it is the ideal constructing machinery for asphalt pavement maintenance and milling.

Main features and functions:

1. The milling width is 1020mm, and one time max. Milling depth is 120mm, and cutter distance is 15mm

2. Milling rotor is driven by three chains with intension device

3. It has travel and milling double speed.

4. Driving axes travel gear is hydraulic pump steeples speed regulating; it has high and low double speed governor

5. The milling rotor is easily approached; rear screed can be raised through hydraulic oil cylinder, convenient for checking the milling cutter tools and change the damaged milling cutters

6. Smart and easy Hydraulic steering

7. Milling Depth control: the depth controller are installed on the rear left and right wheels, though LED Display

8. Braking system: it has service brake system, parking brake system, and emergency braking system.

9. The operation platform is wide and the driver can walk freely

10. The illuminating system is used for night work, the machine front, operating table, work border, the machine rear all have very good light.

11. Equipped with tool box, provide full set maintaining tools.

The main technical parameters

1. Engine system: Adopting China YUCHAI YC6108ZG 6 cylinder water cooling diesel engine, The rated power is 115 Kwan/154hp by 2200 rpm, thefuel consumption≤230g/kWh, the noise is ≤90 dB(A)

2. The rotor driving style: mechanical driving style,

3. Engine Þ high elastic coupling Clutch decelerator Chain transmission milling and cutting rotor

4. The Milling depth is 0~120m and width is1020mm

5. The max. Travel speed: 13km/h

6. The Min. turning radius: 5500mm

7. Milling cutter quantity: 84 pieces

8. Milling cutting rotor width: 1020mm

9. Milling cutting rotor diameter (with cutting tools): 660mm

10. Milling cutting rotor diameter (without cutting tools): 532mm

11. The working style of sprinkling system: electric pump, high pressure water spay, sprinkler is easily to be assembled and cleaning. Water tank volume: 360L

12. Loading capacity:

13. Front axes loading capacity: 7,000kg,

14. Rear axles loading capacity: 6,000kg,

15. Total Loading capacity: 13,000kgs.

16. Total operating mass: 13,500kg

17. Wheelbase: 2800mm

18. Stucco pattern painting style: even grain parallel grid pattern

19. Mechanical Dimensions: 4371×2294×3130mm

20. Transporting Mechanical Dimensions: 4371×2294×3130mm

21. Technical training: 2 weeks training in our factory or we can arrange 2 weeks training to the local site, the training details: driving operation, installing and adjusting, repair and maintenance, hydraulic principle, electric principle, structure introduction, constructing method, and safety protection and so on.

Main parameters of XM100 cold milling machine:

ModelXM100
The max. Milling width1020mm
The max. milling depth120mm
Milling cutter quantities84 Pieces
Drum diameter with cutting tools660mm
Diesel engine details
ModelYC6108ZG
Rated power115kw/154Hp
Rated speed of engine2200rpm
Fuel consumption :1/1 loading230g/Kw.h
Working speed0~13m/min
Travel speed0~13km/h
Grade ability≤20%
The ground clearance≤120mm
The min. turning radius≤5.5m
Operating weight14000kg
Fuel tank180L
Hydraulic oil tank150L
Water tank360L
Electric system24V
Machine Dimension L×W×H4371×2294×3130mm

XM100 cold milling machine standard equipments:

ItemParts nameManufacturer
1Engine YC6108ZGYUCHAI
2Hydraulic systemSAUER
3Milling drum systemKennametal
4Material feeding systemXUZHOU GONGCHENG

Oil, lubricating oil/ grease model:

ItemModel numberTotal contentRemarks

Diesel engine fuel oil

0#

180L

the area with minimum temperature is over 4°Ccan use
-10#the area with minimum temperature is over -5°Ccan use
-20#the area with minimum temperature is over -5°Cto -14°Ccan use
diesel engine lubricating oilCH-4 15W/4015L
Coolant liquidChangchun FD-2, multiple effect coolant liquid30L
driving axleGL-5 85W/9012L
Task boxGL-5 85W/9050L
Travel gear boxGL-5 85W/9030L
Chain case2# Extreme pressure lithium lubricating grease5 BOXES
Hydraulic systemChangchun PULI L-HM68 Anti-wear hydraulic oil150L
all lubricating points2# Extreme pressure lithium lubricating grease5 BOXES
Cold milling machine XM100/101
Packaging Detail:standard packaging
Delivery Detail:7-15 days after payment

Related Product for Cold milling machine XM100/101