coffee cup printing machine

Feature
Digital temperature indicator
Automatic temperature constant
Even pressure heat-resistant material remains stable up to 400 °C
Automatic baking time control
Pressure adjustable
Full mug surface heat transfer print

Specification
Voltage 220V/110V
Power 400W
Temperature range 0°C- 400°C
Time control range 0 s to 600s
Weight 8KG
Packing size: 300 X 300 X 230 mm

Opearation
1,Place a shaped mug, close the handle with appropriate pressure and then plug the power;
Caution! The machine must to be protective earthing properly before operating.
Avoid excessive pressure.
2,Cut the picture size to be large as the mug surface and then put it to the mug by adhesive tape.
3,Setting the temperature to an appropriate (between 180°C- 200°C) by turning the temperature knob;
4,Setting appropriate time, approximate 30 seconds, the temperature rising time is 2 to 4 minutes;
5,Place the picture-wraged mug, close the handle and then turn on the power, red indicator lighting;
Caution! The size of picture should be large enough to cover the whole mug surface to avoid singe and impress.
6,The machine shall start the timer automatically and enter the status of constant temperature when the temperature rises to the setting degree;
7,Release the handle when the buzzer rings and take out the mug;
Get rid of the picture paper 3 seconds after the mug to be took out from the machine.
Caution! For protecting the heating mat, place the shaped mug all the time and close the handle when the machine is not being used.
Another piece of paper should be used to cover the mug surface to avoid the direct touch of the mug surface with the heating mat, when the picture is too small to cover the whole mug surface.

Adjustion
Pressure To adjust the handle to increase or reduce the pressure.
Time To set the timer to the appropriate time, around 30 seconds.
Temperature Turn the temperature knob to set the appropriate temperature, between 180°C- 200°C
Caution The machine needs 2 minutes break every 60 minutes working period when in mass production.

Problems shooting
Color too light The baking time is not enough, so add more baking time which will get the real color.
Blurred image The baking time is too long, just reduce the baking time will make the image distinct.
Partly color light Caused by the short pressure or the coating is uneven, need to increase the pressure or replace mug with uneven coating.
Blurred image caused by heating mat replace the heating mat.
Scar on image The baking time is much too long, just reduce the baking time largely to remove

Printing colorful custom photo to Mug.. You use it for advertise, gift, etc. Automatic stable temperature.
Mug height/Diameter: 6 inch x 3 inch
Accommodates: 11oz, 15oz, 16oz, mugs & bottles. Fully adjustable & no parts to change
Maximum Pressure
More Heating Element Per Square Inch
Digital Automatic Timer and temperature
Heavy Duty Design
Voltage: 110-120V, Press Temperature: 0-399°C, Time setting:0-99.9H, Power: 380W
Brand New, Individual Wrapped with molded foam package with User's Manual.
Packaging size: 36*36*27CM
Shipping Weight: 10Kg.
We warrant to the original user that this product shall be from all defects in material or workmanship for one year from the date of purchase. This warranty does not apply to any product which has been subject to abuse, misuse, negligence or accident.

1. Digital temperature controller with high accuracy within error +-2 C
2. Easy operation to change heat mat
3. PTFE Teflon Fabric coated heat wrap mat guarantees continuous heat and even pressure across the printing area
4. Carbon steel bottom, hard to distort under a certain degree and pressure
5. Digital countdown timer with time-out alarm reminds you of the termination of press
6. Few changeable part results in minimum maintenanc