Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Rotary Drying Equipment

coal slime dryer:, highly efficient dryer, stable dryer equipment;, dry high moisture materials dryer, low energy cost dryer - details see: https://www.machineto.com/coal-slime-dryer-coal-slurry-dryer-equipment-10295007

Coal slime dryer ,coal slurry dryer equipment

The brief introduction:

The coal slime dryer mainly consists of rotor drum, raise material board, transmission device, support device, seal ring, and other spare parts.

The advantages:

The coal slime dryer has the advantages of reasonable structure, excellent manufacture, high output, low energy consumption, convenient operation and so on.

The application:

1 The coal slime dryer is applicable for particle materials, and is also applicable for paste and viscous materials which are mingled with particle materials, or materials whose water content is high.

2 This rotary dryer can dry many kinds of mfaterials which contain moisture, such as coal, coal slurry, slag, industrial waste, and clay stone. Rotary dryer are widely used in building materials, metallurgy, and chemical industry.

Main features:
1. Coal slime dryer has Strong anti overload ability, large handling capacity, less fuel consumption, low dry cost.

2. Adopt downstream drying method, the hot air with wet materials enter into the dryer by the same side, can use the high temperature air to achieve very high evaporation strength, the exist temperature of dryer is low, the thermal efficiency is high.

3. According to different materials' properties change operation parameters, make the material in the dryer cylinder body can form a stable all broken fabric curtain, qualitative heat is more fully.

4.New feeding and discharging device eliminate the feeding jams, discontinuous, uneven and returning charge etc. Phenomenon, reduce the load of dust removal system.

The main technical parameters:

Type (mm)	Gradient (%)	Rotation speed (r/min)	Inlet temperature (°C)	Power (Kw)	Volume (m3)	Capacity (t/h)	Weight (t)
Φ600×6000	3-5	3-8	≤700	3	1.69	0.5-1.5	2.9
Φ800×8000	3-5	3-8	≤700	4	4.01	0.8-2.0	3.5
Φ800×10000	3-5	3-8	≤700	4	5.02	0.8-2.5	4.5
Φ1000×10000	3-5	3-8	≤700	5.5	7.85	1.0-3.5	5.6
Φ1200×10000	3-5	3-8	≤700	7.5	11.30	1.8-5	14.5
Φ1200×12000	3-5	3-8	≤700	11	13.56	2-6	14.8
Φ1500×12000	3-5	2-6	≤800	15	21.19	3.5-9	17.8
Φ1800×12000	3-5	2-6	≤800	18	30.52	5-12	25
Φ2200×12000	3-5	1.5-6	≤800	18.5	45.59	6-15	33
Φ2200×18000	3-5	1.5-6	≤800	22	68.38	10-18	53.8
Φ2200×20000	3-5	1.5-6	≤800	30	75.98	12-20	56
Φ2400×20000	3-5	1.5-5	≤800	37	90.43	18-30	60
Φ3000×20000	3-5	1.5-5	≤800	55	141.3	25-35	78
Φ3000×25000	3-5	1.5-5	≤800	75	176.6	32-40	104.9