CNI Q-switched Laser at 1053nm / MPL-III-1053 / 10~30uJ
1.High peak power, 2.High repetition rate, 3.Short pulse energy - details see: https://www.machineto.com/cni-q-switched-laser-at-1053nm-mpl-iii-1053-10-30uj-10231324
| Place of Origin:Jilin China (Mainland) | Brand Name:CNI | Model Number:MPL-III-1053 | Wavelength:1053nm |
| Output power:1-300mW | Single pulse energy:10-30uJ | Size:Standard |
APPLICATION:
It is used in scientific experiment, optical instrument, optical sensor, measurement, communication, spectrum analysis, etc.
SPECIFICATION:
Wavelength (nm) | 1053±1 | |
Operating mode | Q-switched pulsed laser | |
Single pulse energy (µJ) | 10~30 | |
Pulse duration (ns) | 10~15 | |
Peak power (W) | ~1500 | |
Rep. rate (kHz) | Controllable | Specified One rep. rate, such as 1k, 2k, 3k, up to 5kHz, with stable laser pulses emitting (stable pulse energy, peak, duration and period). |
| Different rep. rate in the range of 1Hz-5kHz can be obtained by input an external TTL signal. | ||
| Uncontrollable | Undefined rep. rate among 5k-20kHz and unstable laser pulse emitting. Suitable for the applications only needing high peak power pulses. | |
Average power (mW) | Average power (mW) = Single pulse energy (µJ) * Rep. rate (kHz) | |
Ave power stability (over 4 hours) | <1%, <3%, <5% | |
Transverse mode | TEM00 | |
Warm-up time (minutes) | <10 | |
M2factor | <1. 2 | |
Beam divergence, full angle (mrad) | <1.5 | |
Beam diameter at the aperture (mm) | ~2. 0 | |
Beam height from base plate (mm) | 24.8 | |
Operating temperature (°C) | 10~35 | |
Power supply (90-264VAC) | PSU-III-FDA | |
Expected lifetime (hours) | 10000 | |
Warranty period | 1 year | |
| Packaging Detail:vaccum anti-static |
| Delivery Detail:1-2 Weeks |
Related Product for CNI Q-switched Laser at 1053nm / MPL-III-1053 / 10~30uJ
Enhanced co2 glass laser tube
Enhanced co2 glass laser tube with germany catalyst technologyHard seal ,longer life span ,better quality
6 months warranty
Enhanced co2 glass laser tube
Enhanced co2 glass laser tubelonger life and better spot mode
MO Materials Laser Mirror 30mm Diameter 95% Reflecting Rate
Mactron Brand molybdenum Laser Mirror 30mm is normally polished only, without coating, used for tough environments.
Long-life 150W CO2 laser tube
New type 150W CO2 laser tube, length 2000mm,diameter 80mm.It is used for cutting and engraving non-metallic materials, etc.
co2 Laser Cooling For YueMing Laser Cutting and Engraving Machine
co2 Laser Cooling Special For YueMing Laser Cutting and Engraving Machine
laser protection mirrors for JFY laser precitec Miyachi Farelaser
wavelength: 1064nmmany famous factory use this kind
stand high temperature
long life
good quality
Silicon Co2 Laser Mirror 25mm For co2 Laser Cutting and Engraving
Mactron Brand Silicon co2 laser mirror 25mm is the most common used mirror for CO2 laser system, it has good durability.
Enhanced longer life co2 glass laser tube
enhanced co2 laser tubelonger life ,stable power
better spot mode
New type, long-life CO2 glass laser tube 150W
Long-life 10000 hours CO2 glass laser tube 150W, Model ZX-1850, 1800mm long, diameter 80mm. It has good stability, laser beam.
Leetro 6515 Laser Controller System
Laser controller Leetro MPC6515 System advanced stand-alone 3-axis motion controller designed for laser engraver and cutter.
Dia 19mm Hot Sell USA Imported CVD Co2 Focus Lens
Dia 19mm Hot sell Imported USA CVD co2 focus lens is used to focus laser beam, the wavelength is 10.6um.wonderful quality.