Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Machine Centre & Parts  >  Machine Centre

CNC VERTICAL MACHINING CENTER, 1.high quality linear guides on all axis ensure high travel speed,, powerful axis servo drivers - details see: https://www.machineto.com/cnc-tapping-center-vertical-machine-center-tv600-10129574

CNC TAPPING CENTER (VERTICAL MACHINE CENTER)

High-rigidity & High-precision Structural Design

1. The major machine components are based on Meehanite cast iron, which is stable in material composition, ensuring machine's long-lasting structural quality.

2. To provide high rigidity mechanism, Finite Element Analysis is used to calculate finest combination among cast iron components.

3. Linear guide way is adopted on all three axes in order to withstand heavy loading and tolerate rapid movement, as well as ensuring precise positioning.

4. Wide base,box-shaped column longer and wider saddle, full support design, assures heavy loading capabilities during machining.

5. Reinforced rib structure is equipped in the spindle head. Appropriate contaacting length between spindle head and column guarantees firm support for the spindle.

Large-span Base Design

1.The large-span base effectively supports and evenly disperses the load force from the saddle. Short cantilever of saddle ensures excellent dynamic precision,

2.Heavy-duty worktable,

3.Effective support of the machining load

4.Steep-slope drain duct for prompt washout of the cutting chips, preventing chips from accumulating within the machine, improving chips removal efficiency and swift cutting fluid circulation.

5.Back-inclined base design to accommodate large fluid tank as well as to accelerate chip removal process and to prevent chips accumulation within the machine.

High-speed high-precision Drive System

1. 3-axis direct drive motor fully eliminates backlash, achieves high-precision and provides stability during high-speed transmission.

2. High-speed, high-precision linear guide way on all 3 axes ensures high acceleration and enhanced working efficiency and productivity.

High-speed high-precision Linear Guide Way

Linear guide ways with zero backlash ensures consistent cutting surface on curve or slope cutting.

Ideal for high speed travel and the drive power requirement can be minimized significantly.

By using rolling contact instead of sliding contact, linear guide way reduces friction loss, reacts fast, and increases positioning accuracy.

Load capacity is high on multiple directions. Multiple contact points are maintained when machining, cutting rigidity can be ensured.

It is easy to assembly and interchange for lubrication system.

Long lifespan can be achieved as a result of extreme low friction loss in the linear guide way.

Highly- efficient chip Removal Mechanism

Specification	TV600
Travel
X travel	mm (inch)	600(23.6)
Y travel	mm (inch)	400 (15.7)
Z travel	mm (inch)	350 (13.8)
Y travel Spindle nose to table	mm (inch)	150-500 (5.9-19.7)
Spindle
Spindle speed	rpm	10000
Automatic tool changer
Tool number	no.	12
Max tool diameter	mm (inch)	80 (3.15)
Max tool length	mm (inch)	200 (7.9)
Max tool weight	kg (lb)	3 (6.6)
ATC type		drum type
Tool shank		#30
Motor
Spindle motor (cont / 30min.rated)	kw (hp)	2.2/3.7 (3/5)
X/Y/Z servo motor	kw (hp)	1.5/1.5/3.5 (2/2/4.7)
Table
Table size	mm (inch)	700x420 (27.6x16.5)
Max load capacity	kg (lb)	250(550)
T-slot (No. x Width x Distance	mm (inch)	3x14x100 (3x0.55x3.9)
Rapid speed
X rapid speed	M/min (tpm)	48 (157)
Y rapid speed	M/min (tpm)	48 (157)
Z rapid speed	M/min (tpm)	60 (197)
Cutting Feedrate	mm/min (tpm)	1-10000 (0.04-394)
Controller
Mitsubishi		64ASM
Miscellaneous
Machine weight	kg (lb)	3300 (7280)
Power requirement	KVA	15
Collant capacity	L	180
Air source	Kg/cm2(psi)	6(85)
Standard
Vertical machining center TV-600
Direct spindle driven system
Spindle programmable air blow
Work light
Spindle cooling system
Base bolt and pad
Cabinet heat exchanger
Chip auger device
Automatic lubrication system
Tool box
Alarm light
Color LCD screen
Mechanical, electrical, operation manuals
Automatic tool changer
Rigid tapping
M30 automatic power off
Optional
Vertical machining center TV-600
Auto door
Transformer
Voltage stabilizer
Low inertial spindle motor
Coolant through spindle system
Tool length measurement system
4th axis rotary table
Ethernet and data server
ATC 20/24 tools
BT-40/CAT-40 tool system
Chip conveyor system
Spindle speed 12000 rpm
Spindle speed 15000 rpm