CLK diffused cyclone industrial dust collector /remover for sale

Products overview:

Diffused cyclone dust extractor characteristic is cone down big, the base has the reflector screen. Has the higher dust removal efficiency, simple structure and advantages of moderate pressure loss. Applicable to capture dry, non-fibrous dust particles.

Product features:

Diffused cyclone dust extractor and general cyclone dust extractor is the biggest difference between two points: one is to have a down cone shape of the cone; The second is in the bottom of the cone with reflector screen. Pour cone is used, it is the increase since the cone wall to cone center distance, reducing the dust gas by cone center short circuit to the possibility of exhaust pipe. The role of the reflector screen can make has been separation of dust along the cone and reflection between screen the girth fall into ash bucket, prevent rising purge gas to the fine dust rolled up away, thereby enhancing the efficiency of dust, when cancel reflector screen after the dust removal efficiency decreases evidently, for example, in the imported gas velocity for 21 m/s, import gas dust concentration is 50 g/m3, no reflection screen efficiency of dust collection only 81% ~ 86%; The 60 ° reflector screen, the dust removal efficiency is 93% ~ 95%. Reflection screen Angle generally USES 60 °, test proves that it is 45 ° Angle reflector screen have higher dust removal efficiency, low pressure loss of the advantage.

The dust removal efficiency:

(1) imported gas dust concentration and border dust efficiency with the relationship between the talcum powder as the sample, respectively in volume for 300 m3 / h, pressure loss for 350 ~ 370 pa and volume for 600 m3 / h, pressure loss for 1500 pa conditions, imported gas dust concentration in 1.7 ~ 200 g/m3. Range change, the dust removal efficiency see chart 4-37. The pressure loss in 350 pa above the dust removal efficiency stationary;

(2) imported gas velocity and dust removal efficiency of the relationship with the increase of imported gas velocity increases a little dust removal efficiency. At the same time, import gas velocity increases, the dust catcher dynamic pressure loss increases very big, therefore, by increasing import gas velocity to improve efficiency of dust collection is not advisable.

techinal parameter