chinese ultrasonic plastic welding machine manufacturer

1.Power:300W-4200W, 2.Frequency:15kHz-35kHz, 3.Welding time:0.01-9.99S, 4.chinese ultrasonic plastic welding machine - details see: https://www.machineto.com/chinese-ultrasonic-plastic-welding-machine-manufacturer-10139472

Place of Origin:Shanghai China (Mainland)	Brand Name:hongjin,Hongjin	Model Number:HJ-2015G	Voltage:110V-220V
Power:300W-4200W	Frequency:15KHz-35kHz	Welding Area:150mm,0-350mm	Dimensions:L425W630H920
Weight:100kg	Usage:radio control model,squirt gun,game station ,computer,stream iron ect,	After-sales Service Provided:Overseas service center available	Delay time:0.01-9.99S/Time
Weld time:0.01-9.99S/Time	Solid time:0.01-9.99S/Time	Control:IC	Color:Depends on customer require
Heat temperature:0-450°C	Horn material:Aluminium,steel or titanium	Welding material:ABS,PE,PP,PVC,HDPE,UPS,PC,NON-WOVEN FABRIC

chinese ultrasonic plastic welding machine manufacturer

Shanghai Hongjin ultrasonic plastic welder Technical parameters

chinese ultrasonic plastic welding machine

Voltage: 220V

Frequency (Hz): 15-50khz(depends on you are require)

Power (P): 1000W-4200W

Welding speed (V): 0.01-0.99/min

Heating temperature (T): 0-450°C

Welding length: 0-260MM

Weight: 95-300kg

Applicable Material: ABS,PP,PE,PS,SAN,Acrtlics, Non-woven fabric and so on.

Machine Pictures

Ultrasonic generator picture:

The height can be adjustable

Ultrasonic plastic welder Specifications

Model	Ultrasonic power	Jointing timer	welding area	dimension	Net weight
HJ-2010G	1000W	0.01~3S	100mm	L425W630H920	95kg
HJ-2015G	1500W	0.01~3S	150mm	L425W630H920	95kg
HJ-1518G	1800W	0.01~3S	160mm	L425W630H920	110kg
HJ-1522G	2200W	0.01~3S	180mm	L425W630H920	110kg
HJ-1526G	2600W	0.01~3S	200mm	L425W630H920	115kg
HJ-1528G	2800W	0.01~3S	200mm	L425W630H920	115kg
HJ-1532G	3200W	0.01~3S	240mm	L425W630H750	300kg
HJ-1542G	4200W	0.01~3S	260mm	L425W630H750	300kg

Company Strengths

The following illustrate the basic principle of ultrasonic welding.

The basic principle of ultrasonic welding

Step 1 - Parts in fixture
	The two thermoplastic parts to be assembled are placed together, one on top of the other, in a supportive nest called a fixture.
Step 2 - Horn contact
	A titanium or aluminum component called a horn is brought into contact with the upper plastic part.
Step 3 - Pressure applied
	A controlled pressure is applied to the parts, clamping them together against the fixture.
Step 4 - Weld time
	The horn is vibrated vertically 20,000 (20 kHz) or 40,000 (40 kHz) times per second, at distances measured in thousandths of an inch (microns), for a predetermined amount of time called weld time. Through careful part design, this vibratory mechanical energy is directed to limited points of contact between the two parts. The mechanical vibrations are transmitted through the thermoplastic materials to the joint interface to create frictional heat. When the temperature at the joint interface reaches the melting point, plastic melts and flows, and the vibration is stopped. This allows the melted plastic to begin cooling.
Step 5 - Hold time
	The clamping force is maintained for a predetermined amount of time to allow the parts to fuse as the melted plastic cools and solidifies. This is known as hold time. (Note: Improved joint strength and hermeticity may be achieved by applying a higher force during the hold time. This is accomplished using dual pressure.)
Step 6 - Horn retracts
	Once the melted plastic has solidified, the clamping force is removed and the horn is retracted. The two plastic parts are now joined as if molded together and are removed from the fixture as one part.

1.IC circuit controlling
2.Automatic over load protection
3.Self moule manufactuing workshop
4.Replacing traditional electic

Products features:

1.Automatic fraquency tracking system controlled by IC circuit
2.Original energy converter made in U.S.A,which is powerful and reliable
3.In case of error operation occurs,automatic over load protection will take effect
4.Equipped with PHILIPS tube,to ensure ultrasonic output power as required
5.Four points based adujstable balance structre,which is easy and convenient for mould djusting
6.With self moule manufacturing workshop,capable of USA 7075,6061 alloy aluminium mould model.
7.MOS-FEE high tech electronic components for replacement of conventional electric crystal drive circuit,which helps to increase response to 10 times faster than conventonal type ,stable and less faults

Specifications:

Model	Frequency	Ultrasonic power	Preforming timer	Jointing timer	Presure timer	welding area	dimension	Power source	Net weight
HJ-2010G	20KHZ	1000W	0.1~3S	0.01~3S	0.1~3S	100mm	L425W630H920	220V	95kg
HJ-2015G	20KHZ	1500W	0.1~3S	0.01~3S	0.1~3S	150mm	L425W630H920	220V	95kg
HJ-1518G	15KHZ	1800W	0.1~3S	0.01~3S	0.1~3S	160mm	L425W630H920	220V	110kg
HJ-1522G	15KHZ	2200W	0.1~3S	0.01~3S	0.1~3S	180mm	L425W630H920	220V	110
HJ-1526G	15KHZ	2600W	0.1~3S	0.01~3S	0.1~3S	200mm	L425W630H920	220V	115kg
HJ-1528G	15KHZ	2800W	0.1~3S	0.01~3S	0.1~3S	200mm	L425W630H920	220V	115kg
HJ-1532G	15KHZ	3200W	0.1~3S	0.01~3S	0.1~3S	240mm	L425W630H750	220V	300kg
HJ-1542G	15KHZ	4200W	0.1~3S	0.01~3S	0.1~3S	260mm	L425W630H750	220V	300kg
									138kg