Home  >  Apparel & Textile Machinery  >  Textile Machinery  >  Spinning Machines

Single spindle driven: low power consumption and more flexible operation. Low noise. Less space. Better yarn quality. - details see: https://www.machineto.com/china-two-for-one-twisting-machine-10277464

Item	Specification parameter
Machine type	Double face and single layer
Application range (Tex)	5×2~74×2
Suitable fibers	cotton, acrylic fiber, polyester and blends
Spindle pitch (mm)	Cotton 225, wool 265
Spindle number/group	16
Standard (max) spindle number	128 (240)
Spindle speed (max, rpm)	Cotton 15000, wool 10000
Twist range (T/m)	90-2800
Twisting direction	S & Z twist interchangeable
Feed package	Cotton 152×φ140, Wool 152×φ160
Winding bobbin	3°30’~5°57’ conical, parallel bobbin
Winding package (max,mm)	152×φ300
Changeable winding angle	16°30’, 19° ,21°30’
Winding tension	Adjusted by super feed roll
Spindle drive way	Single spindle drive
Change Spindle speed way	Frequency control speed
Spindle brake way	Electrical drive
Piecing way	Pneumatic piecing
Tensioner shape	Capsule
Motors	1 single spindle motor per spindle, 1 winding and traverse motors per set
Installed power (KW)	22 (0.16kw/spindle, traverse and winding 1.5kw)

Execllent yarn qulaity. The CV value varies between 1.5%-3.1%

Every spindle is pre-set and tested. Customers only need align the machines and connect them, which greatly reduces the installation time.

Each spindle is driven by its own motor, which saves a lot of power by:

1. no belt friction

2. spindle can start and stop on its own.

3. The actual power comsumption is lower than the belt-driven machine.

The NOVO twister can run at a high speed without changing the spindle plate size, which increase the production capacity.

PAC control ensures user-friendly operation and more accurate control of the machine.

Good packing ensures safe gooding during the transportation.

Top advantages of NOVO:

1. The machine can run at the max speed of 15000RPM without changing the size of the spindle plate. The normal belt machine can run at such high speed with the small size spindle plate. In this case, our machine increases the production

2. The speed difference between each spinde is the smallest in the world, which is better than other European machines. The reason is our use of servo motors. All the spindles are controlled accurately.

3. One operator can operate 10 machines at the same time. This saves a lot of labor cost.

4. Novo TFO twister can save the power by 20% to 30% compared with other machines.

5. The single spindle will stop automatically when the machine detects no twist on the yarn. This saves the power.

6. Memory of all the parameters. If machine stops out of power cut or emergency stop, the machine can be restarted without any problem.

7. The length of each spindle can be preset and recorded.

8. The production can be recorded by single spindle or each work shift. This make the management and anylisis much easier.

9. Different yarn can be twisted on one machine at the same time.

10. Untouched photocell detection of the yarn break.

11. PAC control of the machine which contains several technical patents. It realizes user-friendly operation of the machine and accurate control and record of the machine. WINCE system is also used.

12. Remote control and be realized by linking to the internet.

13. The CV value of the yarn is the best in the world. It can be controlled bwtween 1.2%-3%.

14. The abandonment of the belt saves a lot of maintenance time and labor.

NOVO twister is the best TFO twister in the

world!!!