Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Heat Exchanger

Plate heat exchanger manufacturer, 1.Frame:Carbon steel, 2.Plates:AISI 304/316L,SMO254,Hastelloy,Ni,Ti, 3.Gasket:NBR/EPDM/VITON - details see: https://www.machineto.com/china-no-1-brand-gasket-type-plate-heat-exchanger-manufacturer-alfa-laval-replacement-10241703

China No.1 Brand Gasket Type Plate Heat Exchanger Manufacturer Alfa Laval replacement

Model	BH30	BH60B / BH60H		SH60H		BH100B / BH100H		LB100B		BH150B / BH150H
Cross Reference ALFA LAVAL	M3	M6, M6M		TS6M		M10M, M10B		TL10B		M15M, M15B
Height, H [mm]	480	920	940	704	704	1084	1084	1885	1923	1885	1885
Width, W [mm]	180	320	330	400	410	470	470	480	480	610	650
Min standard length, L [mm]	400	500	500	530	540	700	700	850	850	1150	1150
Max standard length, L [mm]	650	1500	1500	1430	1440	2300	2300	2350	3250	2050	3250
Vertical port distance, VC [mm]	357	640	640	380	380	719	719	1338	1338	1294	1294
Horizontal port distance, HC [mm]	60	140	140	203	203	225	225	225	225	298	298
Max temperature [°C]	180	180	180	180	180	180	180	160	160	180	180
Max pressure [barg]	16	10	16	16	20.6	10	16	10	16	10	16
Flange size	Pipe 1 1/4"	DN50/2"	DN50/2"	DN65/2"	DN65/2"	DN100/4"	DN100/4"	DN100/4"	DN100/4"	DN150/6"	DN150/6"
Max. flow rate [kg/s]	4	16		20		50		50		80

Model	SH200	BH200	BH250	BH300
Cross Reference ALFA LAVAL	TS20M	M20M,T20M,T20B	MX25B	M30
Height, H [mm]	1405	2150	2595	2920
Width, W [mm]	740	750	920	1190
Min standard length, L [mm]	900	1250	1550	1650
Max standard length, L [mm]	2700	3350	3350	5200
Vertical port distance, VC [mm]	698	698	1939	1842
Horizontal port distance, HC [mm]	363	353	439	596
Max temperature	180	180	180	180
Max pressure [barg]	10/16	10/16	10/16	10/16
Flange size	DN200/8"	DN200/8"	DN200/DN250/8"/10"	DN300/DN350/12"/14"
Max. flow rate [kg/s]	190	225	250	497

Applications

General heating and cooling duties. Heating by means of steam.

Standard Design

The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids

between which heat transfer will take place. The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the interpolate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program.

The plate corrugations promote fluid turbulence and support the plates against differential pressure. The frame plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to a support column. Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit, in the frame and pressure plates.

Typical Capacities

Liquid flow rate

Up to 500 kg/s (8000 gpm), depending on media, permitted

Pressure drop and temperature program.

Water heating by steam

300 to 800 kW

Working Principle

Channels are formed between the plates and the corner ports are arranged so that the two media flow through alternate channels. The heat is transferred through the plate between the channels, and complete counter-current flow is created for highest possible efficiency. The corrugation of the plates provides the passage between the plates, supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.

Particulars Required for Quotation

To enable Baode's representative to make a specific quotation, enquiries should be accompanied by the following particulars:

– Flow rates or heat load required

– Temperature program

– Physical properties of liquids in question (if not water)

– Desired working pressure

– Maximum permitted pressure drop

– Available Steam Pressure

Food IndustryMilk pasteurization, Milk and beverage pasteurization , Wine tempering, Bottled water treatment , CIP (Cleaning-in-Place) heating , Reverse osmosis water.

Marine Application Central cooling of the main or auxiliary engines or turbines, Lubrication oil cooling, Recooling of circulated water for cooling cylinders, pistons, injection nozzles, Cooling of Baoder oil, compressor oil and other lubricants, Preheating of lubrication oil and heavy fuel oil, Preheating of seawater for fresh water production, Heat recovery, Heat exchange to air-condition the passengers’ cabins and freight spaces

Othersturbine oil cooler, Chemical industry, district heating, district cooling, swimming pool heating, solar heating

Short delivery time.

High quality

Reasonable price

Customer made

Know-how design and customer support

Certified by ISO9001, CE, UL, WRAS, ROHS, CCS, etc.