Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Drying Equipments  >  Dry Cabinet

China Henan Yonghua Band Layered Mesh belt dryer, 1.drying equipment, 2.low investment, 3.large output, 4.high efficiency - details see: https://www.machineto.com/china-henan-yonghua-band-layered-mesh-belt-dryer-10288679

China Henan Yonghua Band Layered Mesh belt dryer
Main application of mesh belt dryer: It is mainly for drying of plate, strip and granular materials with better ventilation.

The principle is as follows: laid evenly on the mesh belt, driven by the transmission device, the materials move back and forth in the dryer, where hot wind passes through the material and the water vapor is discharged from the weep hole, so as to achieve the purpose of drying.

Mesh belt dryer is used nets with two-way conveying principle, the hot air stove heating or black for drying of medium drying. Namely improve equipment space utilization ratio, and improve ventilation dry conditions.

Mesh belt dryer is composed by the main frame, tail frame, the way among frame, traction chain, nets chain, guide, automatic tensioning device, automatic heating equipment components. The material is the top charging hopper dryer with upper net belt into the dryer, the net belt running smoothly to the dryer, along the chute into the lower, and then back to the machine head, and so on, and the material in the hot air under the baking, gradually dry, by the tail department is sent out.

Mesh belt dryer performance characteristics:

1, with automatic tensioning device, nets with smooth operation, flip freely, and therefore solve the chains, chains, card out running deviation wait for a phenomenon.

2, choose heat-resistant steel braided into screen mesh, high strength, not changeful form, good ventilation.

3, nets brought from speed motor drive, can according to need to adjust the running speed, control the drying time

4 in the dryer, each digital display temperature, it is easy to grasp and control furnace temperature.

5, dryer with maintenance access each section, and is convenient for equipment maintenance.

6, hot air stove heating the only use chain furnace automatic heating equipment, automatic coal, automatic dregs, high thermal efficiency, coal to adapt to the wide, environmental clean, save work time.

7, with fire protection device, kiln head, in the end, a kiln, three thermocouple, 2 flue with smoke gate, once the mechanical failure, immediately put down the gate, partition of heat, prevent fire.

8, the positive pressure hair drier, avoid drying cabinet section and quarter because of lax seal in diameter, into the cool wind, waste heat, causing the waste heat, increase investment cost.

9, design from the upper low temperature area into the material, the low temperature area out of the material, and the material is heated, high low temperature area gradient ramp heat

The low temperature drying the outlet air temperature area more than 100 °C, dust contain is small, induced draft fan, long service life and low operating cost.

Market of Mesh Belt Dryer:

Our machine is hot sale in China. It also has been exported to many countries, such as Russia, Thailand, Vietnam, Oman, Chile, Philippines, Indonesia, Kazakhstan, India, South Africa etc. It is highly appreciated by our customers because of its reliable and convenient working, large capacity, multi-use and so on.

Work Process of Mesh Belt Dryer:

The raw materials can be spread on the conveyor belt by suitable auxiliary mechanism such as star charging distributor, swing belt, grinder or granulator. The transfer belt passes one or several channels which consist of heating units. Each heating unit is equipped with air heating and circle system and each channel has one or several dehumidification system. When the conveyor belt passed, hot-air passes through raw materials from up to low or from low to up to make them dry evenly.

Features of Mesh Belt Dryer:

1. Most of air are recycled and energy saves greatly.

2. Unique sub-air device to make the hot-air distributed.

3. To get the best drying effect by adjusting air-capacity, heating temperature, material residence time and feeding speed.

4. Flexible device configuration; net-belt wash system and material cooling system can be used.

Main Technical Parameter:

Model	Dimensions (m)	Effective dryer length (single) (m)	Width (m)	Motor Model	Motor Power (kw)	Capacity (t/h)
20m*3layers	21.27*2.44*3.016	20	1.9	YCT200-4B	7.5	6-10
40m*3layers	42.35*2.44*3.016	40	1.9	YCT225-4A	11	12-16

China Henan Yonghua Band Layered Mesh belt dryer

Contract: Anne Zhang

Tel:0086-13598443935

....