China good cement rotary kiln furnace with ISO CE approved

China good cement rotary kiln furnace with ISO CE approved:, 1.Used for Cement/Lime, 2.Environmental protection, 3.Fast delivery - details see: https://www.machineto.com/china-good-cement-rotary-kiln-furnace-with-iso-ce-approved-10076676

Condition:New	Place of Origin:Henan China (Mainland)	Brand Name:Hongji	Model Number:Various
Power(W):10-630kw	Dimension(LWH):depends on the model	Weight:46.82-841t	Certification:ISO CE SGS
Warranty:one year	After-sales Service Provided:Engineers available to service machinery overseas	Color:Different color as client required	Capacity(t/h):0.6-208
Obliquity(%):3-4	Rotation speed(r/min):0.158-4.165	Structure&cost:Simple and low	Installation:Under our engineer's guide
Spare parts:Supply by us	Application:cement clinker,limestone,dolomite,etc	Logo:OEM	Product name:rotary kiln

1. Company Introduction:

Our factory is a manufacturer and exporter of mining machinery in China.

Our main products aregrinding mill, briquetting machine,sand making production line, stone production line, magnetic separating production line, Flotation separating production line, cement production line, crusher, dryer, rotary dryer, rotary kiln, coal gasifier, conveyor, ball milland so on.

All of them are ISO9001:2008 confirmed.

2.Introduction of rotary kiln:

The Cement Rotary Kiln has simple structure, convenient and reliable control during the production process, a few wearing parts, high operation ratio. The rotary kiln produced by our factory has rugged structure, smooth operation, high quality outlet products. Besides, we provide our customers with advanced, efficient vertical heating device, and cyclone heating device.

3. Application of rotary kiln:

Rotary kiln is a pyroprocessing device used to raise materials to a high temperature (calcination) in a continuous process. Materials produced using rotary kilns include:

Cement,lime,refractories,metakaolin,titanium dioxide,alumina,vermiculite,iron ore pellets

4. Rotary kiln structure:

The basic components of a rotary kiln are the shell, the refractory lining, support tyres and rollers,drive gear and internal heat exchangers.

The kiln connects with a material exit hood at the lower end and to ducts for waste gases. This requires gas-tight seals at either end of the kiln. The exhaust gas may go to waste, or may enter a preheater which further exchanges heat with the entering feed. The gases must be drawn through the kiln, and the preheater if fitted, by a fan situated at the exhaust end. In preheater installations which may have a high pressure-drop, a lot of fan power may be needed, and the fan is often then largest drive in the kiln system. Exhaust gases contain dust and there may be undesirable constituents such as sulfur dioxide or hydrogen chloride. Equipment is installed to scrub these out before the exhaust gases pass to atmosphere.

5. Export country of rotary kiln:

Russia,India, Vietnam, Kazakhstan, Mongolia, Pakistan, Iran, Ecuador, middle east and other countries and areas.

6.Working Principle:

The kiln is a cylindrical vessel, inclined slightly to the horizontal, which is rotated slowly about its axis. The material to be processed is fed into the upper end of the cylinder. As the kiln rotates, material gradually moves down towards the lower end, and may undergo a certain amount of stirring and mixing. Hot gases pass along the kiln, sometimes in the same direction as the process material (co-current), but usually in the opposite direction (counter-current). The hot gases may be generated in an external furnace, or may be generated by a flame inside the kiln. Such a flame is projected from a burner-pipe (or "firing pipe") which acts like a large bunsen burner. The fuel for this may be gas, oil or pulverized coal.

7.Main Technical Data(parameters) of rotary kiln:

Specifications (mm)	Kiln dimensions			Output (t/h)	Rotation speed (r/min)	Motor power (kw)	Weight	Note
Specifications (mm)	Diameter (mm)	Length (mm)	Obliquity (%)	Output (t/h)	Rotation speed (r/min)	Motor power (kw)	(t)	Note
ø1.4*33	1.4	33	3	0.9-1.3	0.39-3.96	18.5	47.5
ø1.6*36	1.6	36	4	1.2-1.9	0.26-2.63	22	52
ø1.8*45	1.8	45	4	1.9-2.4	0.16-1.62	30	78.2
ø1.9*39	1.9	39	4	1.65-3	0.29-2.93	30	77.59
ø2.0*40	2	40	3	2.5-4	0.23-2.26	37	119.1
ø2.2*45	2.2	45	3.5	3.4-5.4	0.21-2.44	45	128.3
ø2.4*40	2.4	40	3.5	6.2-6.8	0.39-2.44	55	136.5
ø2.5*40	2.5	40	3.5	9.0-10.5	0.44-2.44	55	149.61
ø2.5*50	2.5	50	3	6.25-7.4	0.62-1.86	55	187.37
ø2.5*54	2.5	54	3.5	6.9-8.5	0.48-1.45	55	196.29
ø2.7*42	2.7	42	3.5	10.0-11.0	0.10-1.52	55	198.5
ø2.8*44	2.8	44	3.5	12.5-13.5	0.437-2.18	55	201.58	Suspension preheating kiln
ø3.0*45	3	45	3.5	12.8-14.5	0.5-2.47	75	210.94
ø3.0*48	3	48	3.5	25.6-29.3	0.6-3.48	100	237	Outside disassemble kiln
ø3.0*60	3	60	3.5	12.3-14.1	0.3-2	100	310
ø3.2*50	3.2	50	4	40.5-42	0.6-3	125	278	Outside disassemble