Ceramic sand mill

Ceramic sand mill

The grinding cylinder is horizontal arrangement. Closed structure,Used for continuous superfine grinding and dispersion of liquid and solid two-phase particulate material in the suspension.

1.Rack:Including the bearing support and support part of the abrasive parts,Frame design compact and beautiful; Maintenance is convenient and fast.

2.Machine Type seal:With large end face mandatory pressurization type mechanical seal ;The sealing is reliable and safe;High cycle life.

3.Grinding cylinder:cylindrical,Shell Type ,Both ends connect with feeding and discharging interface,With the high efficiency cooling jacket and connect the cooling water4.

stirring apparatus:Grinding plate with high strength, high wear resistance materials.Unique structure,Through the reasonable layout, greatly improve the grinding efficiency

4..Separation device:Processed material through dynamic hollow rotor_ Large flow area gap drum separator by using the dynamic centrifugal separation principle.Can use smaller grinding media, in the condition of big traffic jam phenomenon will not occur. And good heat dissipation, narrow particle size distribution of products. Therefore, ensure that the product discharge amount of large flow, large cycle.The gap of separator adopts pure zirconia materials; Therefore,the service life is long

5.Driver:Spindle rotor by flameproof three-phase motor, multiple v-belt drive;Smooth operation, low noise.And energy saving effect is remarkable.)

6.Feed pump:Materials are sent to the sand mill entrance by Imported diaphragm pump and piping ,Pipe fittings and beautiful, convenient disassembly,Automatic cleaning design,Convenient to a variety of color materials processing, Meet the needs of customers multi-usage

7.Control button box:Used to control and monitor mixing plant under various working conditions .

Safe and reliable; The maintenance is convenient

8.Power supply:Power supply and the connection from the power supply to the device is not included in the scope of supply.

9.The ball mill is suitable for use in a single, multiple or circular grinding operation

10.Safety protection device:

a,Electric contact thermometer:0-100°C,Automatic stop when set temperature is reached.

b,Electric contact pressure gauge:0-6Kg/Cm²,Automatic stop when set pressure is reached.

c,Hydraulic pressure, air pressure switch:Such as system without water, gas supply, the host is not action

11.Grinding cylinder material quality:The inner wall of the cylinder body adopts high wear-resistant thermal conductivity of silicon nitride or silicon carbide ceramics with good effect ;Cavity is not only has high wear resistance and good thermal effect;And will not contaminate materials(No discoloration )

12.Grinding cylinder volume:About 28 liters.The adjustable volume 2 liters.

13.Volume regulator:Grinding cylinder end cover adopt adjustable volume type design,Effective control of temperature and efficiency.

14.Rotor mixer:High wear resistance of zirconia ceramics material turbine structure;