Ceramic Infrared Heating Panel

Special ceramic body, medium wavelength radiation, emitting external surface. Suitable for drying & curing process. - details see: https://www.machineto.com/ceramic-infrared-heating-panel-10245349

Condition:New	Type:Infrared Heater	Power Source:Electric	Place of Origin:Maharashtra India
Dimension(LWH):As per requirement.

contact supplier for Ceramic Infrared Heating Panel

Medical equipment : Incubator Plastic Industries : Thermoforming and Vaccume forming for plastification of sheets and rolls. Rubber Industries : Lamination and welding of Plastics, Curng Shrinking of PVC paste. Preheating and Vulcanizing of rubber sheets. Preheating of synthetics pipes before coupling. Textile Industries : Dryring of finished textile/ garments/Carpets, Setting of Nylone and Perlon thread. Paper Industreis : Drying of paper pulb and paper glue, paper coating and adhesive activation. paint Industries : Stoving for car bodies epoxy, Lacquer steelpanels. screen printing : Ink drying, Instrument of dial plastics, fascia penal aluminum. Foods and other industreis : Baking and browing of Bakery product, Packaging of food product,Drying of Tobacco, etc.

Comparing Different Forms of Infrared Heaters

Throughout the years many different forms of infrared heat sources have been developed. Some of the more familiar forms seen today are metal sheathed tubular heaters, quartz heaters, quartz tubes, quartz lamps, gasfired catalytic, flat faced panels, and ceramics emitters. Each sources has its own distinctive set of Properties :

a	Metal Sheathed	Quartz Tube	Quartz Lamp	Catalytic	Flat Faced Panels	Ceramic
Radiant Efficiency	56%	61%	86%	80%	88%	96%
Physical Strength	High	Low	Very Low	High	Medium	Medium
Heat-Up Cool Down	Slow	Fast	Very Fast	Very Slow	Slow	Slow
Max. Temp	1400⁰F	1600⁰F	4000⁰F	800⁰F	1600⁰F	1400⁰F
Color Sensitivity	Low	Low	High	Low	Low	Low
Peak Weak Length (Microns)	2.68	2.55	1.16	__	2.25 to 7.9	3 to 4
Maximum Watt. Density	20 to 30 W / inch 2	34 W/Linear Inch.(3/8" Diatube) & 45 W/Linear Inch. (1/2" Diatube)	100 Watts Linear Inch	____	5.25 to 40 Watts/Inch 2	6 W to 44 Watts/Inch 2

Radiant Efficiency :	The total amount of energy that is emitted from the source as infrared radiation. The balance of heat energy from the sources are transferred via convection and conduction.
Physical Strength :	The physical strength of each sources. A high rating indicates a very durable sources that can with stand physical abuse such as dropping wrench on the source.
Heat-Up/Cool Down :	The amount of time required for the sources to come up to operating temperature and cool back down to room temperature.
Maximum Temperature :	Maximum Operating temperature of the sources.
Color Sensitive :	Refers to the ability of a typical load to absorb the special radiation emitted from a source based on the color of the load. The shorter the Wave lengths. As the temperature increases for any given source, a higher percentage of the infrared energy is concentrated in the peak wave length.
Peak Wave Length :	All heat sources radiate infrared energy over a wide spectrum of Wave lengths. As the temperature increases for any given source, a higher percentage of the infrared energy is concentrated in the peak wave length.
Maximum Watt. Density :	Watt density is the heat flux emanating from each square inch of the effective heating area of the elements. W/ inch 2 = rated watts / effective heating area.

Elements

FTE	Bent	245 mm x 60 mm
FFE	Flat	245 mm x 60 mm
HTE	Bent	122 mm x 60 mm
HFE	Flat	122 mm x 60 mm
HSE	Square	122 mm x 122 mm
LTE	Large	292 mm x 92 mm
ESE	Bulb
QFQ	Flat	62 mm x 62 mm
HFQ	Flat	125 mm x 62 mm
HSQ	Flat	125 mm x 125 mm
FFQ	Flat	248 mm x 117 mm
LFQ	Flat	248 mm x 117 mm

Wattages

Ceramic Emitter Wattage
FTE FFE HSE	150 to 1000W 150 to 1000W 150 to 1000W
HTE HFE	100 to 500W 100 to 500W
LTE	100 to 1800W
ESE	100 to 500W
Quartz Emitter Wattage
QFQ	75, 150, 200W
HFQ	150, 200, 250, 300, 375W
FFQ, HSQ	300, 400, 500, 600, 750W
LFQ	750, 1000, 1250W

Thermocouples

(Ceramic Emitters Only ) FRK ( Cast - In Type K )
Permanent, fast response, cast- in thermocouples embedded within the element during manufacturing. Available only in type K
I/C ( Potted - In Type J )	C/A ( Potted - In Type K )
This type of thermocouple can be added after the heater has been kiln fired. Both type J and K thermocouples are available.

Voltages

120 - 220 - 230 - 240 - 480

Custom voltages subject to engineering approval at no extra charge.

Emitter Mounting

The mounting post has a channel near the top where the mounting clip secures the ceramic emitters to the reflector. Our custom designed single piece clip secures the emitters to the reflector and allows for easy mounting and a reduction in the parts required for assembly. Mount emitters into a 20 to 24 Ga. [.036" (.9mm) to .025" (.6mm)] highly reflective aluminized steel reflector.

Packaging Detail:Standard

Delivery Detail:2-3 Weeks.