Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Briquette Machines

1. High profit and low cost in raw material, 2. Increase the net calorific value per unit volume after briquette, 3. Energy save - details see: https://www.machineto.com/ce-professional-coal-mineral-briquette-production-line-10310490

CE Professional Coal/Mineral Briquette Production Line

The requirements of raw materials
1. The materials powder size must be less than 5 cm. If not, you should crush it firstly.
2. Any raw materials with metal is not allowed, otherwise it will damage the surface of rollers.

High lights:

---the roller is made by hard materials, with good wear resistance and long life time;
---the service life of wearing parts is up to 4000 hours;
---the machines electricity cost reduces by 60%;
---the machine is easy to operate and maintain;
---the molding material is energy-saving, easy to transport and higher utilization of waste.
---the final product is smokeless, non-toxic, none peculiar and environmental protection.
---the end products shapes include oval, round, square, ball egg-shaped and pillow-shaped.

Working principle of coal briquette machine
Coal briquette machine will pass the power on to the two pressure roller through the reducer.
The two sides and roll rotation, in both the rotating roll, natural materials to enter the ball roll mode, with the roll rotation, material pressure on a small become larger, when the material to the two rollers rotating line contact point, the pressure of materials has reached the peak. Tremendous pressure in the role of line, the materials becomes a finished product from the powder ball.

Here are the main type and some main technical parameters:

Model	Motor Power	Diameter of Roller	Capacity forCoal	Capacity forCoke	Capacity forCharcoal
HSYQ-290	7.5 KW	290 MM	1-2 t/h	1-2 t/h	0.6-0.8 t/h
HSYQ-360	11 KW	360 MM	2-4t/h	2-4t/h	0.8-1.3 t/h
HSYQ-400	18.5 KW	400 MM	4-6t/h	4-6t/h	1.3-2 t/h
HSYQ-450	22 KW	450 MM	5-7t/h	5-7t/h	2-2.8 t/h
HSYQ-500	37 KW	500 MM	6-9 t/h	6-9 t/h	2.8-3.5 t/h
HSYQ-650	45 KW	650 MM	10-15t/h	10-15t/h	3.5-4.5 t/h
HSYQ-750	55 KW	750 MM	15-20 t/h	15-20 t/h	4.5-5 t/h
HSYQ-850	75 KW	850 MM	20-25 t/h	20-25 t/h	5-8 t/h

Please note that the capacity is depend on your raw materials.

Flow chart of the whole coal briquette production line:

Pictures of machines in each process:

Final briquettes:

Note: please tell me about your raw material, I will offer you more details and information. Thank you!

More information or any request, you can contact me via following ways: