Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Wood Based Panels Machinery

wood drying machine, 1.CE certificated, 2.low consumption, 3.high capacity,, 4.easy operation and maintenance, etc. - details see: https://www.machineto.com/ce-certificated-high-quality-hot-air-wood-sawdust-dryer-10344064

High quality Best manufacturer HGJ series hot air sawdust dryer machine

Introduction:

Sawdust Dryer machineprepare suitable moisture raw material for biomass briquette press. For briquetting press, it is only to control the moisture of raw material at a reasonable range that can make good reasult of biomass briquettes. Or the briquettes will be broken because of too loose or too dry.

For raw materials with heavy moisture content that above 12%, you need to install a drier, this dry make the moisture content below 12% before further processing. This kind of dryer is Air Current type dryer which cost is lower than other type. This dryer is professionally designed for drying wood sawdust. It has advantages of low cost, low consumption, high capacity, etc. In addition, the round places of pipes can be changed to any angle which can solve plant dimension problems.

Operation Principle of the sawdust drying machine:

The whole system consists of fan blower, motor engine, fuel boiler, steel pipe, cyclone and air lock. In this system, wet material is input into hopper by screw feeder. Fuel furnace produces large volumn of hot air. Those hot air is driven into steel pipes, mixed with wet sawdust and moved through curving pipes and drying chamber by the power of fan blower. Fast moving hot air sustains and is mixed with raw material sent by spiral feeder in the suspending state through the steel pipe, moisture evaporates as the material traverses along the steel pipe and is rendered dry at teh discharge end. Humid air is continuously exhausted, thus the material is dried.

Raw Materials:

It is special suitable for drying heat sensitive material likesawdust,rice hull,milled wheat straw,milled cotton/corn stalksand so on. It also can be used for drying thegrainbetter.

Wood sawdust dryer machine:

This wood sawdust drying machine is suitable for drying materials of moisture 30-60%. Wet material is input into the hopper. The wood drying machine is equipped with two fuel boilers, inlet, steel pipe, exhaust blower (fan), air lock and cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are discharged from the outlet with air lock. This wood dryer can reduces the moisture to 8-12% one time with the advantages of lower cost consumption and high efficiency.

Details of wood sawdust dryer machine:

MAIN DATA:

Model	Power (kw)	Capacity (kg/h)	Net/Gross Weight (kg)	Raw materials Diameter(mm)	Packing Dimension(m³)
HGJ-I	4	300-400	1000/1100	<1mm & < 5mm	6.36
HGJ-II	7.5+0.75+0.75	500-600	2040/2260	<1mm & < 5mm	12.41
HGJ-III	11+0.75+075+5	700-800	2850/3080	<1mm & < 5mm	13.59
HGJ-IV	15+0.75+0.75	1000-1200	2850/3080	<1mm & < 5mm	13.59

Wood drying machine with motor: