Home  >  Industrial Supplies  >  Refrigeration & Heat Exchange Equipment  >  Heat Exchanger

This swimming pool heat exchangers are compacted shell & tube heat exchanger with high efficiency spiral twisted tubes design. - details see: https://www.machineto.com/ce-approved-stainless-steel-316l-swimming-pool-heat-exchanger-10242129

We produce the following products for solar, boiler or heat pump heating system

Stainless steel pool heat exchangers

Titanium pool heat exchangers

Sidearm heat exchangers

Stainless steel electric pool heat exchangers

Titanium electric pool heat exchangers

Feature of stainless steel pool heat exchangers

1. Material:full stainless steel 316L

2. Tubes: spiral twisted tubes

3. Connectors: BSPT thread or NPT thread

4. Design pressure: 1.31MPa
5. Design temperature: 208C

5. Surface: polished

6. Mounting bracket is available

7. Special design for boiler or solar water pool heating system.

8. Packing: carton with wooden case.

Advantages ofstainless steel pool heat exchangers:

1. Increase heat transfer efficiency for water heating
2. Big flow with low pressure drop design suitable for all application.
3. Prevent the fouling or scare on the tube surface.
4.Full titanium construction produces a high anti-corrosion advantage for swimming pool water, sea water, and other solutions with high chlorine concentration.
5. Polish surface has a good feature.
6. Compacted design
7. Durable material constructed

Heat Exchangers Performance of Swimming Pool Heat Exchangers:

Model No.	Normal Capacity		Pool Capacity (gallons @ 1°F/hr)	Pool Capacity (Liter @ 1°C/hr)
	kW	Kbtu/hr
SP-55	16	55	4700	32021
SP-85	25	85	7300	49735
SP-155	45	155	13300	90613
SP-210	61	210	18000	122634
SP-300	88	300	25800	175776
SP-360	105	360	31500	214610
SP-600	175	600	52500	357684
SP-1200	352	1200	105600	719455
SP-2400	704	2400	211200	1438910
SP-3000	880	3000	264000	1798638
SP-3600	1056	3600	316800	2158365
SP-4500	1320	4500	396000	2697956

Note:

1. For occasional (holidays & weekends) use pools we recommend a 2x output multiplier to obtain a 2°F/hr heat up rate;

2. Nominal values are based on 60°C temperature between incoming heating and heated water.

Typical residential application:

In-floor heating

Swimming pools, spas heating

Driveway snowmelts

Typical industrial application:

Oil cooler

Transmission and engine cooler

Boiler sample cooler

Waste water heat recovery