Home  >  Chemical Process Machinery  >  Chemical Machinery & Equipment  >  Rotary Drying Equipment

sawdust dryer, 1 low consumption, 2 easy to operate, 3 SGS certification, 4 long warranty time - details see: https://www.machineto.com/ce-approved-high-quality-sawdust-dryer-sawdust-dryer-machine-wood-sawdust-dryer-10294582

CE approved sawdust dryer ,

wood sawdust dryer,

sawdust dryer machine

A:Introduction of Sawdust Dryer:

1.Drying is important before pelletizer or briquetting and carbonizing. To get the superior quality of biomass briquettes with high density, it is necessary to control themoistureof material at

8-12%exactly.

2.There are two kinds of dryer. Rotary type dryer/Drum type dryer is called roller type dryer or drum dryer, this type of dryer is used to dry raw material with a40-70%moisturer content, with the features of high efficiency, large capacity, high drying rate, easy to operate and maintain and so on. The other type is Hot air flow type dryer/Pipe type dryer, this is also an important plant for making the charcoal, which can automatic feeding with high strength drying, high capacity, small dust and short time, this dryer is suitable for dry20%-50%moisture content .

B:The Structures of Sawdust Dryer:

Sawdust dryermainly consist of: 1) Furnace + 2) Connection pipes between sawdust dryer and furnace + 3) Feeder machine + 4)Temperature detector + 5) Sawdust dryer roller ring + 6) Big gear(45# steel) + 7) Transmission parts ( Motor, Reducer, Bearing,Small gear) + 8) Carrier Roller of sawdust dryer + 9) Discharge machine + 10) Cyclone + 11) Water dust collector for sawdust dryer + 12) Air induced fan

C: Working principle of sawdust dryer from LEABON:

Sawdust dryeris mainly for drying the small size raw materialless than 30mm.

Firstly, Thesawdust dryerenter into the drying sysem by conveyor or bucket conveyor, the sawdust raised by lifting plate to making the sawdust and heat totally contact with each other.

Thesawdustare evenly distributed in sawdust cylinder,at the start of thesawdust dryerand the end of the dryer have temperature detector, so you can check everywhere temperature inside thesawdust dryer.

After thesawdust dryerhave fan, it will absorb the hot air into the dryer and finally make the material to dry.

Between the sawdus dryer and fan have cyclone, it can collect the dust out from the sawdust dryer.

D: The main features about the sawdust dryer:

1. Thesawdust dryerhave high degree of mechanization, large production capacity and continuous working.

2.With simple and excellent structure, the material running smoothly inside the sawdust dryer cylinder.

3.Thesawdust dryerwith less mechanical failure, low maintenance and low power consumption.

4.The dryer work uniformly and the drying product is very good.

5.With complete dust removal equipment and protect the environmental.

6.Sawdust dryerwith no dust spilling.

7.Easy to operate and have a good operating environment.

E1: Technical parameters of sawdust dryer(Drum type):

Dia of roll (mm):3-5

Gradient(%):3-5

Rotate Speed (r/min):3-8

Feed in temp(°C): ≤220

dry raw material with a 40-70% moisturer

Pictures of rotary drum type sawdust dryer:

E2: Technical parameters of sawdust dryer(Air-flow/Pipe type):

this dryer is suitable for dry20%-40%moisture

We're the professional supplier for pellets making line machines.We can design the automatic production line as your requirements with the lowest cost.

General Description For Whole Line

The whole line includes mainly many machines, not all of the machine is necessary. You can choose from the machines.

Step 1: Crusher-- It is used to crush the wood into sawdust.

Step2: Screw conveyor --It is used to transfer the powder to the dryer machine. You can also use man power instead of this machine.

Step 3: Dryer--If the moisture of the powder is more than 12%. Then you can use this machine.During drying, the moisture of the material should be less than 50%. You also can choose to dry the sawdust naturally.

Step 4: Screw conveyor--It is used to transfer the powder to the pellet machine. You can also use man power instead of this machine.

Step 5:Pellet machine--It is used to make the powder into pellets. The moisture of the powder should be from 8-12% for good working.

Step 6: Cooler—It is used to cool and screen the final pellet.

Step7: Lifting machine-- To transfer the pellet to the packing machine.you can also use man powder instead of this machine

Step 8: Packing machine--It is used to pack the pellets in bags.

Please feel free to contact me if you need more information of our machines: