CE Approved heat press machine for mug/cup use sublimation paper

CE Approved mug heat press machine for mug use on print mug,digital control with low cost. - details see: https://www.machineto.com/ce-approved-heat-press-machine-for-mug-cup-use-sublimation-paper-10067509

Condition:New	Plate Type:Flatbed Printer	Place of Origin:Guangdong China (Mainland)	Brand Name:xinyan
Model Number:XY-009	Usage:Paper Printer	Automatic Grade:Semi-Automatic	Color & Page:Multicolor
Gross Power:350w	Dimensions(LWH):33.5x33.5x23.5	characteristic:steady and higher speed	color:black/white & custom made color
voltage:220v/110v	power:350w	time range:0-999s	temp range:0-399
weight:6.5kg	Type:Heat Transfer,Heat Press Machine

CE Approved heat press machine for mug/cup use sublimation paper

contact supplier for CE Approved heat press machine for mug/cup use sublimation paper

our company

CE certification

SPECIFICATION

Model

Voltage

(V)

Power

(W)

Weight

(KG)

Packing Dimension

(CM)

XY-012A

220/110

350

6.5

33.5x33.5x23.5

machine photo

(Manual of Digital mug press)

(technic parameter)

(Rating Voltage)

220V / 110V

( Fahrenheit arrange)

200°F~430°F

( power )

(Atmospheric pressure)

86~106KPa

(electric current)

(Ambient temperature)

0°C~50°C

(Solid-state control voltage)

( Time arrange )

1s-999s

( Timer display )

°F

( Wiring )

(Cable output)

(packing size )

80MM*70MM

( conversion between Fahrenheit and Celsius)

1°F=1°C*1.8+32

( instruction of panel )

1 ( increase button)

(TEMP) ( Temperature Indicator)

2(MODE) ( Time and temperature settings )

(SET) (Setting indicator)

3( ) (Reduction button )

(TEME) (Timer Indicator )

4( Timing start button )

5( Temperature and time display )

( Operation )

(instructions of the panel display)

1, 1.Plug in the power, turn on the power switch.( the machine rated voltage 220V, rated input power of 350W )

2, 2, set the operating procedures: (This equipment is displayed as degrees Fahrenheit temperature)

Holding temperature: Press the mode setting button MODE (S3) for the first time, when L2 indicator light, press the increase or reduction button to set the holding temperature

MODE(S3) Cup heater temperature: Press the mode setting button MODE (S3) the second time, when L1, L2 indicator light, press the increase or reduction button to set the mug heater temperature

MODE(S3) cup transder time: press the mode set button MODE (S3) the third time, then L2, L3 indicator light, press the increase or reduction button to setting.

Operation of heattingmug: Press the Mode button once, SET (L2) light is blinking,start the heating,the timer control will automatic countdown when the temperature reaches the set temperature heattingcups,Then TEME (L3) indicator light, buzzer call. The heattingis finished.

Remark: Holding temperature arrange is 200°F-390°F,heattingcups temperature arrange is 390°F-430°F.Cup heattingtime setting range 0-999s with a temperature setting of the local self-locking feature,such as the holding temperature is set to 200 °F, the machine will automatically limit the temperature setting range of heating cups 200 °F -390 °F. Opposite, if the first Heating cups set temperature 390 °F, the machine will automatically limit the holding temperature setting range is 200 °F -390 °F

3,( Heating transfer )

Slow Heating: stamping the required objects placed well, pressing pressure handle, turn the power switch, the temperature starts to rise. When the temperature rose to the starting temperature, the buzzer sounded a short song, by implementing key once, long until the buzzer sounds, and then execute button once, the end of stamping. remove the object, the temperature will gradually return to the starting temperature automatically, at the speed of grilled standby.

4,( the problem of the transfering)

A. subdued colors: temperature too low or uneven pressure or time is too short.)

B.B. Fuzzy pattern: long time lead to ink spread)

C.(C. Matte pattern: excessive pressure or temperature is too high )

D.Local Fuzzy Pattern: Hot Stamping regional heat unevenly distributed.)

E,scar of pattern: transfer time is too long. ListenRead phonetically)

F, different shades of color patterns: uneven pressure or object transfer coating uneven.)

G. sticker: temperature too high or object transfer coating bad.)

(Parameters recommended; initial temperature set to 200 °F, the maximum temperature set to 430 °F)

(The highest temperature heating time, set to 40s )

(Stamping: mug with a clean cloth surface, the transfer paper wrapped package mugs, with high temperature adhesive tape fixed, put in the hot cup machine mold cavity, the pressure to promote the handle, such as the pressure is too large or too small, adjust the push bar stroke.)

Remark: The mug heater is not afraid to burn, but will try to avoid baking cup roasted coaster far below the height of the width of the cup, the same should not only be a small part of the cup coasters in baked stuffed baked , as in the cup on a small portion of grilled drawing on the pattern should start treatment.

Packaging Detail:Carton and wooden box.Other packing ways according to your requirments.This packaging can be effective in ensuring the quality safely.

Delivery Detail:7 working days