Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Other Woodworking Machinery

charcoal briquettes machine from sawdust, 1Better stability, 2Save worke labor and power, 3Automatic heating device, 4CE.ISO9001 - details see: https://www.machineto.com/ce-approved-charcoal-briquettes-machine-from-sawdust-10343395

CE approved charcoal briquettes machine from sawdust

1> Thecharcoal briquettes machine from sawdustis use sawdust,crop straw,wood branches,coconut shell,cotton stalks,sesame straw,sugarcane waste, rice hulls, peanut shells, bamboo crumbsand such materials to make fuel briquette under high temperature andpressure.

2>These raw materials are crushed first, and then compressed into formed fuel products with high density and high calorific through machine pressing and heating.

3> charcoal briquettes machine from sawdust is not required any binder and chemical product.

4>The raw material density is generally about 130kg/m3, and the density of formed charcoal bar is 1100-1400kg/m3.

5>The charcoal bar size is one over ten of the original, but its combustibility has been improved greatly.

6> These charcoal bars can replace coals for producing and living, andthe thermal efficiency is enhanced by 30%-40%.

7> After carbonization, the bars are silver black, in hollow quadrangle or hexagon columnar type, with glossy section.

2>> Technical parameter of charcoal briquettes machine from sawdust:

Model NO.	FR-I	FR-II	FR-III
Productivity Kg/h	150-200	200-250	250-350
Motor power KW	11 kw—15kw	15 kw---18.5kw	18.5kw—22kw
Weight kg	550 kg	650kg	800 kg
Out size mm	1800*700*1450	1800*700*1450mm	2200*900*1600
Moisture	5%-12%	5%-12%	5%-12%

Requirment of the raw materials for charcoal briquettes machine from sawdust

• diameter (size) :3-5mm (if it can't meet the requirement, it will need a crusher to crushing the raw material)
• moisture: 8-12%, (if more than the water requirments, it will need a dryer)
• no much impurity in the raw material

Process of the whole prdocution line of charcoal briquettes machine from sawdust

The process for producing charcoal briquette as follow:

1. Crush the raw material into small pieces (diameter is about 3-5mm)

2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive

5. Carbonized the briquette stick

Picture Explanation:

Wood crusher--- Air flow dryer--- Charcoal briquette--- Furnace--- Wood Charcoal

Contact way: