Home  >  Printing Machinery  >  Heat Transfer

CE Approved heat press machine use on printing cloth,metal plate,glass,stone plate and so on,cheapest with good quality! - details see: https://www.machineto.com/ce-approved-38x38cm-heat-press-machine-trasnfer-on-t-shirts-stone-plate-metal-plate-10067766

our comapny

CE certification

machine style

machine details photos

Instruction for plain heat press machine 38x38 cm

Brief Introduction:

With the flat transfer press, any image and letter can be transferred onto the ceramic, glass, or metal objects as well as T-shirt, basically for almost all the flat objects which can be heated above 200°C.

Transfer unique images.

Simple operation and requires no

Function:

1. Power switch

2. Pressure Screw

3. Press Handle

4. Heating platen

5. Silicon pad

6. Temperature controller

7. Timer controller

8. Power lead & fuse

Technical Parameter:

l Specified Voltage:220V

l Power:1.8KW

l Temperature Range: 0-399C

l Time Range: 0-999Secs

l Dimension: 38x38cm

l Net Weight:24KG

l Gross Weight:26KG

Operation Procedures:

Taking the white cotton cloth as an example

A. Mirror print your picture on light sublimation paper with normal ink

B. Hold up the press handle, open the heat board

C. Instruction light will be on

D. Switch power on

E. Adjust the temperature in upper controller, Click the SET button , press + or - to adjust appropriate heating temperature-180°C, time needed approx. 10 minutes to reach 180°C;(Heating temperatures depends on materials, please request for the standard temperature information)

F. Adjust time in upper controller, Click the SET button , press + or - to adjust appropriate heating time 30 seconds(The heating time depends on the materials)

G. The machine will keep the constant temperature status when reaching the setting temperature

H. Put the cloth on the silica gel board holder, put the picture facing the cloth for heat transferring,press down the heat board and the timer counts automatically. Note:Too heavy pressure may cause the handle transformed. Must adjust the pressure ahead of operation.

I. While time up,the buzzer warns automatically. Swift the power off, hold up the press handle,take out the cloth and tear out the picture paper right away

Taking the black cotton cloth as an example:

A. Print your picture on dark sublimation printing paper with normal ink

B. Hold up the press handle, open the heat board

C. Instruction light will be on

D. Switch power on

E. Adjust the temperature controller on the left side to adjust appropriate heating temperature-180°C, time needed approx. 8 minutes to reach 180°C

F. Adjust time controller on the right to the appropriate heating time 30 seconds

G. The machine will keep the constant temperature status when reaching the setting temperature

H. Put the cloth on the silica gel board holder, put the picture facing the cloth for heat transferring, then put the adiabatic paper / cloth onto the picture, press down the heat board and the timer counts automatically

I. While time up,the buzzer warns automatically. Swift the power off, hold up the press handle,take out the cloth and take away the adiabatic paper 30 seconds later ( for adiabatic cloth, can take away immediately and no need to wait ) Make sure to take the material out from the machine once finish working.

Warranty and Maintenance:

1, One-year guarantee.

2, Pressure: Adjust pressure screw clockwise to increase the pressure, counter clockwise to decrease the pressure

3, Time: Check and adjust the position of the jiggle switch in the rear machine case if the buzzer not warn or keep warning when time is out.

4, If press the pressure handle,the handle would be spring back automatically, please adjust the adjusting screw downward. After finished the printing, the handle may be too heavy to hold up, please adjust the adjusting screw upward.

5, Please check the circuit while the heat board is not available after the machine was on several minutes.

6, The natural life of the Silica Gel Board is 10000 times working.

7, The natural life of the Heat Board is 10000 times working.

8, Please feel free to contact us without any delay if there is any problem in the quality.

Caution:

1. The machine must be connected with the ground wire!

2. Do not touch the heat board while heating!

3. Do not touch the heat board once finish working as time is needed to cool down.

4. Please keep children away from the machine!

5. Please use the heat insulation glove to pick the finished goods!