CD1/MD1 min5t (h=min9m)2013 hot sale electric hoist

Wire Rope Electric Hoist, Capacity: 0.25~32t,Lifting height: 30m, Competitive price,Quick delivery, A Quality - details see: https://www.machineto.com/cd1-md1-min5t-h-min9m-2013-hot-sale-electric-hoist-10102183

Feature:Other	Condition:New	Application:Construction Hoist	Rated Loading Capacity:min 5t
Rated Lifting Moment:9m	Max. Lifting Load:32tons	Max. Lifting Height:min 30m	Span:customized
Place of Origin:Henan China (Mainland)	Brand Name:DITAI	Model Number:CD	Certification:BV
Warranty:12month	After-sales Service Provided:Engineers available to service machinery overseas	Voltage::220V 380V 400V 415V .etc	Sling Type::Wire Rope
Lift speed ::8m/min, 0.8~8m/min	Weight overload protection device::included	Current overload protection system::included	Voltage lower protection function::included
Motor::Nanjing or Nanjing Special motor	Color::On demand	Working duty::m3~m5	min curvature radius(m):2.5

CD1/MD1 min5t (h=min9m)2013 hot sale electric hoist

contact supplier for CD1/MD1 min5t (h=min9m)2013 hot sale electric hoist

CD1/MD1 wire rope electric hoist

Introduction:

Wire rope electric hoist is the most popular hoist for single girder overhead cane to use, because of their characteristics of tight structure, smart body, safety and reliability, common-used parts, well changeable property, strong lifting capacity as well as convenient maintenance. The hoist can also work by fixing to a section of I-beam. It is a light duty designed for general work such as warehouse, workshop, mining, etc. There are two common models: CD1 model lifts with single speed, and MD1 model not only with usual speed but also with low speed.

The capacity is available by 0.5t, 1t, 2t, 3t, 5t, 10t, 16t, 20t, 32t. The lift height is available by 3m, 6m, 9m, 12m, 18m, 24m, 36m up to 100m.

Parameters:

NAME		MD Electric hoist
Capacity		5T
Lifting height		10m
Hoisting speed		8/0.8 m/min
Traveling speed		30m/min
Steel wire rope	Diameter of rope	15mm
	Diameter of wire	0.7mm
	Structure form	D-6*37+1
I-Beam rail type (GB706-88)		36b
Working duty		M3 medium
Electric power		380V, 50HZ, 3Ph
Hoisting motor	Type	ZDS10.8/7.5
	Power	0.8/7.5KW
	Circle speed	1380r/min
	Current	2.4/18A
Traveling motor	Type	ZDY121-4
	Power	0.8KW
	Circle speed	1380r/min
	Current	2.4A

Componentsof hoist with low price

Motor	Hoist Motor is a taper type rotor motor with braking; it is one of the best quality motors, which has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.
Gear Box	Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
Wire Rope	Hoisting ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
Rope Drum	Grooved hoist Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.
Electric apparatus controlling system	Model CD1 and MD1 hoist is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V, 36V or 24V(safety voltage).
Rope Guide	Rope Guide is in two halves, ensuring easy accessibility. It encircles the drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thicken and dilated, so that it is not easy to be damaged.
Hook	The Hook Block is tested to 150 % of full load before assembly.

Applicable scope&working conditions:

The product applies to such an environment as no faire, no explosive danger, no corrosive media and no dirt exist. And the temperature is between 20°C below zero and 40°C up zero, the wetness is no higher than 85%, the applicable power source is 3_phase alternating current (A.C for short), 50 Hz (60Hz) frequency and (380V~66V) voltage. Their rated load must be reduced by 20%accordingly as their working grade increases by one grade compared to their middle-lever working grade.

Advantages:

1. High durability

2. Low maintenance cost

3. Hassle free operation

4. Easy handling

5.Long working life

Safety :

1. Overload protection:If the material is over the capacity, the hoist will give a sharp warning for protection itself.

2. Emergency brake:If the operation staff encounter some emergency situation, we could start the emergency brake system to protection the related treasure.

3. Control Method:Room control or remote control to avoid any injure to the operation staff

4. Main lifting motor:with thermal protection and currency protection.

Manufacturer standard.

manufacturer standard:

All the equipments are developed based on the latest national requirement GB/T3811-2008 of Crane Design Standard ,JB/T3695—2011 of Electric Hoist Double Girder Overhead Crane with Electric Hoist and JB/T1306—2008 of Electric Single Girder Hoist.

Technical Support:

A complete quality control system has been set up to guarantee that all products of the company comply with national technicalstandards, we have physical &chemical lab,measuring room and whole-machine testers whichproviding strong technical support for the sustainable development of the enterprise.

After-sales service:

1.One year warranty for whole machines.

2.Providing free quick-wear part.

3.Low charge for continue maintenance when warranty is expired.

4.Exclusive engineer support at any time.

5.We can provide free training to end-users.

Factory

Test bench

production line