Carbon Steel Linear Sand Vibrating Screen Separator

2.One of 10 Henan E-businessmen.

3.Excellent Equipment Manufacturer of China

This is our visit to Yuntai Mountain

Screeing Equipment For Sugar/ Ceramsite sand /Urea/ Soda ash/ Silicon carbide

1. Combination of Circle, elliptic, linear motion.

2.Equipped with automatic tension and automatic cleaning sieve net installation system

which can make the screen mesh long service life and change the screen mesh conveniently.
3. Reinforced base ensure the equipment operation machine more balance, can also

according to the actual siteconditions the perching hook to meet customer’s reform needs
4. Improve wire rope hanging structure, to avoid steel wire wear
5. 2 or 3 decksscreen frame design can be choosed.
6. Used for powder orgranule feed screening and grade, can also be used for voidance of

raw materials in feed factory,the grading of intermediate products after second smashing.

Successfully applied to screening granular urea in fertilizer plant. But it is also used to screen

other thousands of different materials and is suitable for many industries and application as below:Chemical, carbon product, wood chips, grain cleaning, mineral, fertilizer, steel shot, clay, animal feed etc.

Especially for heavy alkali, salt, resin, fertilizer, urea granule size, feed, reduced iron

powder, zirconium oxide, ceramic, barite, etc.

1.Circular motion at feed end

The gyratory motion at the feed end of the machine immediately spreads the material across

the full width of the screen surface to maximize screen utilization even though the feed is

from a single point. At the same time, this motion stratifies the material, causing the fines to

sink down against the screen surface. The particles that are appreciably smaller than the

openings quickly pass through at this part of the screen.

2.Changing to elliptical motion at center

As the circular motion diminishes into an elliptical path, the gentle near-horizontal motion

causes the fine particles closer in size to the screen mesh the near-size particles to fall

through the mesh openings.

3.Straight-line motion at discharge end

The nearly linear reciprocating motion at the discharge end of the Gyratory Screener

removes those particles closest in size to the mesh openings while gently conveying the

oversize material off the screen.

After sales service plan

1.Installation,Debugging.

Provide installation files, technical data and related soft copies or videos etc

2.Warranty

The provider guarantee the vibrating screen could meet production technical

standard and performancerequirements indicated in the contract.

Warranty: 24 months for the machine after delivery,12 months for the motorafter delivery.

--------------------------------------------------------------------------------

3.Technical Support
Our company will make occasional call to find problems and solve them in time.

Provide technical support timely.

4.Response Time(24 hours)
Contact us through Telephone or Email, we will respond within 24 hours.

1.Material to be processed?

2.Using purposes: to grade or to remove dusts?

3.Granule size of the materials? (Or mesh number)

4.Moisture content if any?

5.Granule size proportion if possible to get?

6.Capacity (tons or kg or litter per hour or day)

7.Local power supply (voltage and frequency)

Instant message :QQ :1511399744,Skype:cnzymachinery004

MSN:cnzymachinery004(hotmail) Cell phone:+86 15090079594