Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Welding Equipment  >  Other Welding Equipment

1.Capacitor discharge Welding stud, 2. Cost Effective, 3. Taylor Studwelding(Made in United Kingdom) - details see: https://www.machineto.com/capacitor-discharge-welding-stud-10138163

Capacitor discharge Welding stud

Capacitor Discharge Weld Studs

For trouble free welding you will need to purchase high quality studs. We stock and sell the full range in all the usual materials and sizes, with Capacitor Discharge studs manufactured to European and International standards for automatic stud welding. We can also supply the less popular thread forms, in fact many of these are also held in stock.
Capacitor Discharge Weld studs for hand and automatic feed must conform to BS EN ISO 13918 standard for threaded, unthreaded and internal threaded studs.

MATERIALS	STANDARD
Low Carbon Mild Steel 4.8 (weldable)	EN 20898-1
Stainless Steel A2-50 (weldable)	EN ISO 3506-3
Aluminium Alloy AlMg3	EN 573-3
Pure Aluminium	EN 573-3
Lead Free Brass 4.8 (weldable)	ISO 426 – 1 ISO 1638

STUD MATERIAL

Brass Studs are not usually stocked but can be manufactured to order.

All studs supplied self finish except Mild Steel which are copper coated to extend shelf life.

For positioning CD studs the pips can be located in constant depth shallow indents.

An automatic "centre-pop" or punch press may be used to form these indentations but a manual centre punch must not be used.

Ideally templates made from sheet metal or Tufnol should be used and advice on the construction of these jigs is available on request from our sales office.

Data sheets detailing strength and weldability of different materials are available on request.

Drawn Arc Welding Studs

For trouble free welding you will need to purchase high quality studs.
We stock and sell the full range in all the usual materials and sizes, with Drawn Arc studs manufactured to European and international standards. We can also supply the less popular thread forms, in fact many of these are also held in stock.
Where possible all Drawn Arc stud threads are cold rolled so that the flow-line of material is not interrupted.
The surface quality is considerably improved and its strength is doubled. The thread is less prone to wear and offers more resistance to corrosion. All Taylor Drawn Arc studs are supplied with threads manufactured in accordance with BS EN ISO 13918 but other threads are available upon request.

Stud Material

STUD TYPE	MATERIALS	STANDARD
Pitch Base Reduced Base Unthreaded	Low Carbon Mild Steel 4.8 (weldable)	EN 20898-1
	Stainless Steel A2-50 (weldable)	EN ISO 3506-3
Shear Connector	Mild Steel S235JG3+C450	EN10025
	Stainless Steel 1.4301 1.4303	EN 10088-1
Short Cycle	Mild Steel 4.8 (weldable)	EN 20898-1
	Stainless Steel A2-50 (weldable)	EN ISO 3506-3