Home  >  Industrial Supplies  >  Industrial Air Conditioners

1. Cabinet Air conditioner, 2. AC220V-240V, 3. half embedded type, 4. side-mounted installation - details see: https://www.machineto.com/cabinet-air-conditioner-yx-fk-3500w-ac-220v-240v-half-embedded-10222584

Cabinet Air Conditioner YX-FK Series

——Introduction for the products

The cabinet air conditioner refrigerates the air through inside and outside two independences, and exchanges the heat inside the cabinet to the outside by the heat -exchanger. By this way, it can protect the electricity wind chest's electrical element in the controllable temperature range movement. Simultaneously the cabinet air conditioner has dehumidifies the function, which will guaranteed the cabinet interior has the ideal temperature and the humidity.

Fengtely is popular of varies of the Cabinet Air Conditioners in the national market, which can meet the demand of the consumers.

The function of Indoor series:

IP54 series product is by non- condensed water design. In case of the vapour condensation water cannot be transpired in time, it will be expelled from the spare outfall of the cabinet air conditioner based on the cabinet is in a bad airproof condition.

Core parts——R134a compressor, which is environmental, resisted high temperature and high pressure. And it includes the current over- load protection equipment and can keep normal working even the working

environment is by the 55 °C.

The indoor series of the Cabinet Air Conditioners is used the intelligence control system, which can display the temperature of the inside cabinet. And the adjustable panel also can be well convenient for all kind of the users.

This series products are used the industrial centrifugal fans (FK340T exception). And it includes the current over - load protection equipment. The continuous working reaches as for 120,000 hours.

The setting procedures and the maintenance are simple. When the cabinet air conditioner is working in the dust, or greasiness, plush environment, the net cover of the spreading heat wind enter must be cleaning up periodical.

FK series of standard indoor cabinet air conditioner:
- Installation Instructions

(F K 3 4 0-site physical map)
- Side-mounted air-conditioning installation steps:
1. Installed in accordance with the corresponding models of air conditioning openings Figure a good hole in the cabinet side or on the door (Note: the side-mounted air-conditioning depends on the cabinet to install the upper, must ensure that the open hole is horizontal, because the air conditioning requirements, it is best tohorizontally mounted)

2. The air conditioner fixed in the cabinet has been opened good holes, screws;

3. comes with air conditioning drain installed Fortunately, air-conditioning at the bottom of, and connect the supplied hose

4.The power cord from the professionals, and open the air conditioning panel switch, air conditioning thermostat to display the cabinet temperature, circulation fan starts running at the same time within

5.air conditioning temperature setting (reference air conditioning random installation manual) air temperature factory setting is 3 3 ° C, under normal circumstances we do not recommend re-regulation, to avoid causing unnecessary trouble.

Certification:

Picture of tapping: