Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Lathe

This machine is conventional,it has the best cost performance, can be used in fine machining and semi-fine maching. - details see: https://www.machineto.com/c5116b-3a-vertical-lathes-10128543

C5116B/3A vertical lathes Technical specification

This specification is forφ1600×1400 Single column vertical lathes, the supplier will produce following the national relevant industry standard.

1. Brief introduction

This machine is single column vertical lathes, the max.cutting diameter is 1600mm, the max. height of workpiece is 1400mm, this machine is suitable to machine ferrus and non-ferrus material with high speed tool and carbide tool.

Cylindrical surface and conical surface can be done in this machine, other operations like surface cutting, cutting-off also can be performed on this machine

2. Machine parameter

No.	Item	Parameter
1	cutting diameter of tool head	1600mm
2	cutting diameter of side tool head	1400mm
3	working height	1400mm
4	table diameter	1400mm
5	max. weight of work piece	5000kg
6	table speed	5-160r/min
7	table speed steps	16 steps
8	feed rate of both tool heads	0.8-86mm/min
9	cutting force of tool head	25000N
10	cutting force of side tool head	20000N
11	torque of table	25000N.M
12	tool head stroke vertical direction	1000mm
13	tool head stroke horizontal direction	915mm
14	side tool head stroke vertical direction	900mm
15	side tool head storke horizontal direction	630mm
16	elevation stroke of cross beam	1000mm
17	swivelling angel of tool head	±30°
18	rapid traverse of tool head	1800mm/min
19	tool arbor dimension	30x40mm
20	main power	30kw
21	machine dimension	2660x2740x3928
22	machine weight	13.2t

3. main structure and performance

3.1 layout of machine

This machine is mainly composed of following parts: Column, Main drive gear box, elevation mechanism of cross rail, rail head, Electric system, Hydraulic system and etc. The main gear box is fastened on the end of the column, table is set on the front of column, the cross rail move along the slideway of column, there is one rail head of which can feed in a rapid traverse speed and move along the guideways of cross rail. The table is driven by AC motor, one suspending pendant is set to be used to perform all the operations of machine.

3.2 main structure performance

3.2.1 main drive mechanism

The main transmission system is driven by AC motor, hydraulic clylinder is set to change the engagement of gears to change the speed, there are altogether 16 steps of table speed, the operating is performed on the suspending pendant station.

3.2.2 feed mechanism

The two direction of movement of rail head is driven through AC motor, rapid traverse and feed motion of rail head is realized by the feed gear box.

3.3 main character of each part

3.3.1 table

Dynamic pressure guideway is used in the table, two Model 3182100 short cylindrical roller bearings are used to ensue the rotation precision of table, the inner conical surface of table bearing has ensured the radial clearance can be adjusted. Adequate oil flow ensure the good lubrication of table bearing, four chuck jaws are used on the table.

3.3.2 Column

The column is connected with the table base, the material is high intensity and low stress casting, cross rail elevation mechanism is set on the slide of column that is driven by the AC motor.

3.3.3 cross rail

Cross rail can move along the guideway of the colum and driven by one lead screw, safety floating nut is mounted on the cross rail to ensure the safe and reliable moving of cross rail, the cross rail is clamped and realesed by tapered iron which is pushed by one level in which one end is connected by hydraulic cylinder

3.3.4 rail head

The rail head is three layer structures, cross saddle, swiveling saddle and ram. They are all made of high dense and low stress casting; the ram is made of nodular cast iron.

3.3.5 hydraulic system

The hydraulic system is mainly composed of table dynamic pressure system, main gear changing system, the cross rail releasing and clamping system, lubrication system and so on, we use prominent products to ensure the high quality of machine.

3.3.6 There are two ways of lubrication: automatic lubrication system and hand oil pump.

4. accuracy

Run-out of table in the diameter of 1000mm, the allowable deviation is 0.02, every increment of 1000mm, the allowable deviation is 0.01mm

Run-out of table side surface, the allowable deviation is 0.02, every increment of 1000mm, the allowable deviation is 0.01mm

The vertical movement of cross rail to the table surface

0.06/1000 in the plane perpendicular to the cross rail

0.04/1000 In the plane parallel to the cross rail

The parallelism of the rame head moving to the table surface, in any measurement of 1000mm is 0.03mm

perpendicularity of the movement of ram to the table surface

In the plane parallel to the surface

In the plane perpendicular to the cross rail

Perpendicularity of side head movement to the table surface 0.01/300mm

5.Packing for delivery(photo)