Home  >  Apparel & Textile Machinery  >  Glove Making Machines

BX204-13G Glove knitting machine, 1.same as Shima Seiki NewSFG 13G, 2.More economy and perform wel. - details see: https://www.machineto.com/bx204-13g-glove-knitting-machine-10260754

Model	BX204-13G
Size in needles	L: 88 M: 83 S: 78 XS: 73
Container load	40 sets/20’FT 82 sets/40’HQ
Power	single phase, 220V, 200W
Lubrication	automatic lubrication
Carriage	small carriage
Stitch density	step motor controller
Display	LED display
Dimension	1,200mm (L) x 680mm (W) x 1,700mm (H)
Weight	250KG
Options	size changing device 3-finger palm/D3 device U2 device (plating feeders) U3 device yarn tail insertion device secondary yarn cutter/C2 device infrared safety area sensor glove drop assistant device

Features:

1.Compact carriage: It features a completely new carriage system which is 20% smaller and 30%

lighter than its predecessor.This design yields quicker and more responsive carriage and increases

productivity ,all while minimizing structural stress on the machine for increased durability

2.Stitch density control:A new stepping motor finely adjusts stitch density to help the glove conform to

the various parts of the hands. By doing so,gloves cab be shaped to fit fingers and hands snugly and

extend the benefits of the ultra fine gauge gloves even further.

3. X-yarn device:It eliminate the necessity for using post-knit overlock sewing machines at the cuffs.The X-yarn device is therefore an effective way to cut manual labor costs and increase overall productivity.

4.Computerized lubrication:BX204 computerized lubrication provides an optimum amount of oil to

all required parts according to a preset schedule.Automatic lubrication also prevent over-lubrication,conserving oil and keeping your products clean.

5.Control panel:It features on ease of operation. Large LED displays current knitting conditions,

Touch-control numerical keys also offer convenient data input.

Options:

1.3-Finger palm device:With this option the upper palm portion below the middle-three fingers is knitted separately from the rest of the palm.This provides independent movement

and more comfortable and better fit.

2.Yarn tail insertion:Previously,yarn tail sticking out of the fingertips were inserted by an air blower

BX204 features a new motor-driven yarn tail insertion,inserting the yarn tails into the fingertips for the highest quality.

3. Secondary yarn cutter/C2 device:It features a motor-driven cutter and looper for secondary-color yarns.Its electronically controlled motor enables holding and releasing of secondary yarn at specified courses intervals during knitting.

4.Two color device for fingers:This device can knit glove fingers with two colors.By using conductive

yarn at the fingers,the gloves can be used for touch-screen products.