Building Material Rotary Kiln/Rotary kiln with ISO Certificate Used in Lime, Cement Industry

1,Advanced national technologies, 2,Efficiency running rate, 3,High production, 4,Low heat consumption - details see: https://www.machineto.com/building-material-rotary-kiln-rotary-kiln-with-iso-certificate-used-in-lime-cement-industry-10076826

Condition:New	Production Capacity:80-90 ton/day	Place of Origin:Jiangsu China (Mainland)	Brand Name:Wenao
Model Number:3.8*56m	Voltage:380V	Power(W):200kw	Weight:401 tons
Certification:ISO9001:2008	Warranty:1 years	After-sales Service Provided:Engineers available to service machinery overseas	Slope of the kiln shell:4%
Capacity:500t/d	No.of supporters:3	Driving type:Single driving	Type of thrust roller:hydraulic thrust roller
IP grade:IP44	Speed regulation range:100-1000r/min	Weight of discharging kiln hood::12.5t	Total weight:401t

Introduction:

Rotary kiln is the main equipment of calcining the cement clinker. The characteristics of a rotary kiln

are with simple structure, convenient and reliable control of the producing process,with little wearing parts

and high running rate. It is the equipment calcining the high grad cement in the cement factory. The rotary

kiln is widely used in the metallurgy,chemical industry,construction and other industries.

Features:

1) The rotary kiln is an inclined rotary cylinder, the raw material enter the cylinder through the high end of the machine,then move in with the movement of of the rotary kiln. Therefore, the rotary kiln is a conveying equipment.

2) Rotary kiln is a combustion device.

3) Rotary kiln has the function of heat exchange.

4) Rotary kiln has the chemical reaction function.

5) The rotary kiln has the function of degrading and re-using the waste.

The structure chracteristic of ourcompany is:

This series of rotary kiln is the large-size advanced international calcining kiln & furnace which is developed by

our company and many scientific research institutes such as Beijing General Reserch Institute of Mining &

Metallurgy, Changsha Research Institute Of Mining & Metallurgy, Suzhou Sinoma Reserch Institute of Non-

metallic Mining Industry, etc. Compared with the rotary kiln with the same specification made by the traditional

technology, this series of torary kiln can make the production capacity increase by 30%, make the heat

consumption reduce by 40% and make the discharged flue gas temperature<250 °C , so it is convenient for

collecting dust and meeting the modern environment protection needs about energy saving and consumption

reducing. This rotary kiln is widely used for extracting nickel from laterite, calcining the activated limestone,

oxidized pellet, magnesium oxide, aluminum oxide, titanium dioxide, etc.

1. The rotary kiln shell design fully take into consideration of the corner at shell flexible supporting to extend

the lifetime of refractory bricks and castings.

2. Adopt supporing roller bearing with big diameter and small ratio between length and diameter to improve

the reliability. The bearing is automatic self-sligning bearing.

3. The better sealing effect of new type open gear hood sealing type.

4. The spring lamination overlying type lexible sealing, double layer spring lamination sealing increase the

heat insulation layer to improve the reliability and lifetime.

Parameters:

1Specification: φ3.8×56m

2 Capacity: 500t/d (lime)

3 Slope of the kiln shell: 4%

4 Rotating speed of kiln (main driving): 0-2.18r/min

(Auxiliary driving): 0.0712r/min (4.27r/h)

5 NO. of supporters: 3

6 Sealing type: sheet steel seal of kiln hood

7 Cooling type of kiln hood: air cooling

8 Driving type: Single driving

9 Type of thrust roller: hydraulic thrust roller

10 Cooling water consumption of each set of thrust roller: 2.5m³/h

Main driving	Electrical Motor(YVF2-355L1-6)	Rated power	Rated voltage	IP grade	Speed regulation range
		200kw	380v	IP44	100-1000r/min
	Reducer	Type		Total Ratio
		ZSY500II		I =40