Home  >  Mining & Metallurgy Machinery  >  Mining Machinery  >  Other Mining Machines

Be used for cutting construction reinfoced concrete, Widely used in the building construction,cutting for houses and bridges. - details see: https://www.machineto.com/building-construction-demolition-cutting-diamond-wire-saw-10319465

1. Description:

The construction wire is used mainly for cutting reinforced concrete or for demolition.

The diamond wire is essentially composed of three main components:

* Steel cable with diefferent diameter depending on the application

The cable is formed by 7 secondary cables with different diameters depending on the type.

* Sintered diamond beads.

Bond and diamond studied for the material to cut.

* Assenbly with springs, rubber or plastic.

Protects the steel cable from the abrasive action of the stone and also sbsorbs the energy

of the cutting friction of the beads against the stone.

2. Advantage

* Good performance for cutting big-size blocks without inner break

* No vibration while cutting

* Low nois

* Excellent precision

* Hight cutting speed

* Energy consumption reduced to the minimum

3.Technical specification:

Reinforced concrete cutting (Standard property)
Model	Dia.(mm)	Type assembly	No.Beads per meter	Material type	Cutting speed (m2/h)	Lifetime (m2/m)
WSRC10.5RS	10.5mm	Rubber + Srping	40 bpm ( 44bpm is available)	3-5% reinforced concrete	2-5	2-7
WSRC11.0RS	11.0mm			>5% reinforced concrete	0.8-2	1-2.5
WSRC11.5RS	11.5mm			steel structure	0.5-1	0.5-1.2

4. Attentions for the diamond wire cutting on stationary machines

1. Regular inspections of diamond wire self rotation and make adjustment in time.

2. Regular inspections of diamond wire abrasion to avoid cut-in-one-side problem happened,once it happens, make the solution in time.

3. Regular inspections the joint, as well as the beads of two sides, if they are abrase badly,

replaces them in time

4.The steel cable tension of the stationary machines should be controlled within 250-300kg(φ4-5mm)

5 .Linear speed is changed according to the different hardness of stones.

6. For the new wire, when start to cut, its linear speed should be slower 2-3m/s than the standard

mentioned above, it is good for sharpen.

7. Water consumption is around 15-25L/min.

5.Packing details:

6. Shipping method for your reference

Weight (kg)	> 45 kg	> 21 kg (Cargo)	<21kg (parcel)
Option	By Air	By Courier ( DHL, TNT, Fedex… etc)

Remark:

The weight should reach 45kg can shipped by Air (Requested by Airline companies)

Other shipping way is up to your choice.

7. Contact details