Home  >  Industrial Supplies  >  Boiler Parts

Buffing Tool, a. Easy To Operate, b. Time Saving., c. Portable - details see: https://www.machineto.com/buffing-tool-10211158

Buffing Tools:-

Buffing Tools ¼" - 1" I.D.

Buffing Tools are used for final polishing or removal of light and soft deposits from ferrous and non-ferrous tubes that have been previously cleaned. Used in straight or very large radius tubes in a clockwise direction only.

Tube I.D.		Buffing Tool	With Drill Tip	Replacement Blades	Adjusting Tool
inch	mm
5/16-3/8	7.9-9.5	BPBT-1	BPBT-1-T	BPBB-1	BPBT-AT
3/8-1/2	9.5-12.7	BPBT-2	BPBT-2-T	BPBB-2	BPBT-AT
1/2-9/16	12.7-14.3	BPBT-3	BPBT-3-T	BPBB-2	-
5/8-1	15.9-25.4	BPBT-4	BPBT-4-T	BPBB-3	-

Buffing Tools 1" & UP I.D.

Buffing Tools for Tubes/Pipes 1"-3" (25.4-76.2mm) I.D.

Buffing Tools are used for final polishing or removal of light and soft deposits from ferrous and non-ferrous tubes that have been previously cleaned. Used in straight or very large radius tubes in a clockwise direction only.
-BPBT-7Buffing Tools for tubes 1”-3” (25.4-76.2mm) I.D.
-BPBT-7-TBuffing Tools for tubes 1”-3” (25.4-76.2mm) with drill tip
-BPBB-5Replacement Blades for BPBT-7

Our Other Product:-

Boiler tube cleaner machine is a 3 phase electric motor (2800 rpm) mounted on 3 wheel trolley fitted with a carrying trolley. Horse power of motor is selected depen-ding upon the length & size of shaft, and type of scaling. Push button starter is provided to control the motor. Each machine is fully wired, carefully tested & fitted with a 10 ft. Length (Or longer if required) PVC cable to main supply.Motors are available in enclosed system as well as in open system (i.e. Without covering of above motor..

Boiler tube cleaner is used along with flexible shaft, tool head cuter for hard scale & brushes for final cleaning.

Sr.	POWER IN HP	POWER IN KW	Electric supply	Model No.	RPM
1	5 hp	3.75 Kw	50Hz/440 V, 60Hz/220V	BFM-50	2900
2	7.5 hp	5.63 Kw	50Hz/440 V, 60Hz/220V	BFM-75	2900

Our Other Product Range :-

CONDENSER,CHILLER,HEAT EXCHANGER TUBE CLEANER:-

ELECTRIC TUBE CLEANERS:(BPC-5" SERIES)

In Electric Tube Cleaner, the brushes or other cleaning tools are rotated through a tube at tip of flexible shaft. Simultaneously water gets injected, hence loosen deposits leaving tubes cleaned. Flexible shafts ensure us in bent tubes. All Models consists of tool storage box, single direction foot switch, mobile dolly, 1 direction air foot switch is optional.

All Units are available with following specifications:-

Model No.	Motor HP KW	Tube ID Inch MM	Speed RPM
BPC-3	0.75 - 0.56	1/4 -1 6.4 - 25.4	910
BPC-4	1.00 - 0.75	1 & up 25.4 & up	910
BPC-5	2.00 - 1.50	1 & up 25.4 & up	910
BPC-6	2.00 - 1.50	1 & up 25.4 & up	1440

NOTE: While Ordering,please mention electric specifications.