Home  >  Material Handling Equipments & Parts  >  Material Handling Equipment  >  Other Material Handling Equipment

1. Big conveying capacity, 2. High and changeable hoisting height, 3. Stable reliable operation and long life service. - details see: https://www.machineto.com/bucket-elevator-z-type-bucket-elevator-10199133

1. Working principle of the bucket elevator.

The materials are scooped up by the hopper and brought to the top along with the conveyor belt or conveyor chain, and then the materials will roll down after bypassing the top wheel, and the bucket elevator will pour the materials to the receiving chute. The driving belt of bucket elevator with driving belt often uses rubber belt which is installed on the upper or lower transmission drum and the upper or lower redirection transmission drum. Bucket elevator with chain drive is often installed with two parallel transmission chains, and there is a pair of transmission sprocket on the lower or upper part and a redirection chain wheel on the upper or lower part. Bucket elevator is often installed with enclosure to avoid dust pollution.

2. Application of the vertical bucket elevator.

The machine is applicable for conveying the power, grain and block materials, such as coal, cement, block, sand, clay and ore. The bucket elevator is allowed to convey materials with high temperature when armed with special circle chain structure.

3. Characteristics of the vertcal bucket elevator.

1).Low driving power, inflow feeding, induction unloading, high-volume hopper intensive arrangement. There is almost no feedback and excavating circumstance when materials are lifted, so invalid power is little.

2).Wide lifting range, little materials type and property requirement can not only lift general powder and granule materials,but also lift high polishing materials. Sound seal and little circumstance pollution.

3).Good running reliability, the advanced design principle and handling method assure reliability of whole machine running,

the non-fault time exceed 20 thousand hours. Stable running make it reach higher lifting height.

4).The life is long, inflow feeding, non excavating with hopper and there is few extrusion and collision circumstance between

materials. There is little materials sprinking during feeding and discharging to reduce machinery abrasion.

5).wide application

bucket elevator as one of material handling equipment is used in powder, graininess and patch delivering upward unpolishingand subpolishing scattered materials whose density is less than 1.5t/m³, such as coal, grail, dust coke.

4. The main technica parameters of the vertical bucket elevator.

Specification	Max. lifting height (m)	Conveying amount (m3/h)	Pitch of buckets (mm)	Motor power
160 type	28	3-8	500	3-7.5
200 type	31.5	6-15	500	3-7.5
250 type	30.16	10-25	500	4-11
300 type	30.16	25-35	500	5.5-15
350 type	31	19-40	600	7.5-18.5
400 type	32	35-50	600	7.5-22
450 type	32.7	42-60	600

5. Details of the parts.

Note: Cusomized services can also be provided!