Home  >  Construction Machinery  >  Engineering & Construction Machinery  >  Mortar Spray Machines

We have many types of brick lining machines. They are widely used in rotary kiln. - details see: https://www.machineto.com/brick-lining-machine-10110452

The machine is fit any kiln diameter between 3.0M-7.2M. It features hydraulic jacks, screw jacks, and arch hinge connections allowing for the quickest and easiest machine adjustments in the cement kiln refractory industry

CHARACTERISTIC

Highly adjustable for conical and taper kiln sizes

Allows for minor adjustments due to kiln distortion

Hydraulic Jack and screw jacks for easy adjustments with no tools

Master Valve with Emergency Shut off valve for safe, efficient and easy installation

WORKING PRINCIPLE

The equipment is composed of the rack, rack-run parts, adjustable arc frame, cylinder and the pneumatic and hydraulic top-bar parts and guide pulley parts (see the assembly graph of the machine structure ).

The machine is working as a driving force to compressed air, compressed air works through the triad oil-water separator parts and take-off and landing controlling switch of cylinder into the cylinder, under the control of the take-off and landing controlling switch, it asks to complete the moving to top place and returning movements of the cylinder block.

The machine with a pressure protection device (built-in reservoir pressure), can maintain a short period of time, so that gas pressure does not decrease after gas source is stopped

BRICK LINING MACHINE	BL42R
Kiln Diameter	4000-4800MM
WORKING PRESSURE	0.4-0.6Mpa
CYLINDERSTROKE	160MM
NOISE	85dBA
SIZE	4200*4330*3730MM
WEIGHT	2500KG
air-driven hydraulic pump	PATG1102
WORKING PRESSURE	0.4-0.6Mpa
FLOW RATE	40cu.in/min
WEIGHT	7.45KG
HYDRAULIC CYLINDER	RC1010
STROKE	258MM
WORKING PRESSURE	0-40Mpa