Brand New Discount Hydraulic Splitters, Concrete Splitter Motor Driven
Type:Rock Splitter | Condition:New | Application:Rock Splitter | Motor Type:DC Motor |
Power(W):0.75kw, 2kw, 4kw, 7.5kw | Place of Origin:Fujian China (Mainland) | Brand Name:DSL | Model Number:DS90A-E |
Dimension(L*W*H):1.2m*1.2m*0.97 | Certification:CE, ISO9001 | Warranty:3 M | After-sales Service Provided:Overseas third-party support available |
Weight:80kg-120kg | Specifications(MM):1200*1170*800 | Fuel tank capacity:40L | Working medium:46 or 68 anti-wear hydraulic oil |
Splitter Length(mm):1100 | Configurable splitting machine number:1~10 handle | Splite Width(mm):12 | Diameter:36-50mm |
Introduction
Splitting Cylinders Are Handheld Demolition Devices, Which Controllably Split Material With The Use Of Hydraulic Pressure. When Larger Conventional Demolition Devices Are Ruled-Out The DS Rock Splitter Is The Perfect Answer Due To Low Dust Production, No Flying Debris, No Vibrations, No Noise And No Obnoxious Exhaust Fumes.
Applications:
Ceiling demolition - bunker demolished inside a building
The Job:
The remains of an air-raid shelter had to be
demolished in a historic-society protected house in
Elsenheim, France. The concrete ceiling was thicker
than the ceilings in the other rooms, which caused it
to project into the upper floor. The ceiling consisted
of three layers, of which the upper and lower were
very hard, and the middle soft and crumbly.
The requirements:
The walls, 1.3 m thick, were very heavily reinforced. As the bunker was inside a building the work had to
be accomplished without noise, pollution, excessive
dust or vibrations. A conventional hydraulic breaker
proved incapable of demolishing the ceiling because
the outer layers were too hard. It only produced
severe vibrations.
The solution:
The work was conducted from the floor above the
shelter. First, the requisite holes were drilled with a
DR 086 mini drill rig. This was mounted to a small
Brokk 150 demolition robot. Following this, a single
C 12 N splitting cylinder was used to demolish the
hard, uppermost layer of concrete (about 45 cm
thick). Powered by an electric EP-type hydraulic unit,
it produces the minimum of noise, dust and vibra-
tions. It proved possible to remove the next, softer
layer with a hydraulic breaker, also mounted to the
Brokk 150 robot. The third, hard layer was demolished in turn with the
C 12 N splitting cylinder and EP power unit. Given the
specified conditions, it would not have been possible
to demolish the shelter ceiling without a hydraulic
rock and concrete splitter.
Specifications:
Hydraulic power Unit | ||||||||
Engine Model | Specifications | Weight | Fuel tank capacity(L) | Working | Engine | Working pressure | Work flow | Configurable splitting machine number |
(MM) | (KG) | medium | power | (Mpa) | (L/Min) | |||
Diesel engine type | 1150*1180*940 | 120 | 40 | 46 or 68 anti-wear hydraulic oil | 4.2KW | 55~60 | 2.13 | 1~10 handle |
Gasoline type | 1200*1170*800 | 100 | 40 | 46 or 68 anti-wear hydraulic oil | 7.5HP | 55~60 | 2.13 | 1~10 handle |
Motor type | 384*280*620 | 75 | 30 | 46 or 68 anti-wear hydraulic oil | 4KW | 55~60 | 2.13 | 1~10 |
(380V) | ||||||||
Pneumatic type | 364*280*620 | 100 | 40 | 46 or 68 anti-wear hydraulic oil | 4.04kw 5.5HP | 55~60 | 13 | 1~10 |
Hydraulic splitter gun | ||||||||
model | diameter | The minimum hole depth | Wedge length | crack wide | crack time | splitting force | weight | |
(mm) | (mm) | (mm) | (mm) | (S) | (T) | (kg) | ||
DS90A | 35-38 | ≥400 | 200 | 10--35 | 5--12 | 500 | 20 | |
DS90B | 38-42 | ≥300 | 150 | 10--40 | 5--12 | 700 | 22 | |
DS90C | 38-42 | ≥500 | 250 | 10--40 | 5--12 | 680 | 23 | |
DS90D | 38-42 | ≥600 | 300 | 10--40 | 5--12 | 600 | 28 | |
DS90E | 45-48 | ≥800 | 380 | 10--40 | 5--12 | 826 | 40 |
Service and Support
With many years of drilling experience, we know how important it is to have the right servicing capabilities in place. Dig Sword land machine provides a complete offering of servicing, training, and maintenance programs, and has a dedicated team of global Technical Support Groups.
To Honorable Customers:
Welcome to our store, If you are searching Mining Machinery, congratulations, your hunting has come to an end. Our company
manufactures and exports a comprehensive line of mining tools, including pnuematic hammer, air leg, hand held & internal combustion rock drill, hydaulic rock splitter air compressor and spare parts, all conforming to the international standards. Moreover, All Product are produce in house with large scale, Small profits but quick turnover is our strategy. So I believe you will find what you want here!
This item is available for immediate delivery.
For more Information, please feel free to contact me.
---------------------------------------------------------------------------
Fisher Wu
Tel: +86-591-8860-2995
Fax: +86-591-8380-8668
Mob: +86-158-0609-0610
Skype: fisher2687
http://www.digswordland.com/
Packaging Detail:Wooden Case, Carton Case or Up To You |
Delivery Detail:5 Days After Receipt of Your Payment |