Bottled water interior brush bottle washer machine/ equipment for 400-600bph

2.Main Technological Data

(1)Work heads: For bottle washing: 18 For bottle filling: 18 For bottle capping: 6

Main motor Power: 1.5Kw

(2)Height of bottle: 120-320 mm Diameter of bottle: 40-100mm

(3)Power: 380V 50Hz

(4)Total weight: 2000kg

(5) Dimension: 2300*1600*1900mm

Bottled water interior brush bottle washer machine/ equipment

3.Working principle and main characteristic

1-Working principle:

When bottles are sent to the machine by conveyor continuously, they firstly are deliveried to the receiving wheel by air-slide conveyor and then to washing part. The bottle clamps hold the bottles and trun over 180°to wash, then return back to their original position after enough washing and drying. Then, the bottles are sent to the middle thumb wheel 1 and to the filling part to be filled, then moved by middle thumb wheel 2 and reach to capping part to be capped, at the same time, cap trimmer sends caps to the top of the bottles and capper screws caps. At last, bottles are sent to the conveyor chain by the out stirring wheel to next working position.

2.Main characteristic:

1.Adaptability is wide: Because all parts have a height adjust device, the height of bottle can be adjusted within the range of 120~320mm, the diameter can be adjusted within the range of Φ40-100mm.

2.Production capacity can be adjusted continuously: using a frequency inverter to control the speed. So it works more reliable.

3.This machine has a complete set of reliable protection system to protect the machine itself and the operator.

4.Compare with similar type of machine, it has following performances:

♥More compact in structure, more beautiful in appearance.

♥The structure of bottle rinsing clamp is more delicate.

♥Screw head uses magnetic parts.