Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Gear Cutting Machines

1.without oxide layer 2.fast speed, high efficient 3.energy saving, energy conservation, low cost 4.small deformation. - details see: https://www.machineto.com/big-gears-high-frequency-induction-hardening-furnace-10125962

high frequency induction hardening machine, igbt induction hardeningequipment,IGBTinductionhardeningfurnace.

zhongxing the features of shaft hardening equipment.

1.meet with request of hardening all kinds of gear wheel and shafts, technical maturity, quality assurance, use electrical safety and stabilize. Please feel easy to use.

2.induction coils adopt forming coils, scanning hardening and water spray at same time.

3.can meet with request of hardening surface of shaft within diameter 150mm.

4.can meet with request of hardening the tope of gear wheel within diameter 250.

hardening the guide rail of machine tool should meet with below request:

1.1.the HRC must equalization, same, and the hardening depth should moderate.

2.HRC should meet with request, guide way hardening can’t deformation.

3.heating speed should faster.

4. the hardening coils request perfect in workmanship, if the guide rail over wide, the coils should make single side hardening. If guide way over narrow, should two sided one time hardening.

5.hardening equipment should request energy-efficient.

Hardening equipment:

frequency about 40KHZ,smaller can hardening high precision small shaft within diameter 10, hardening depth can keep within 1mm, bigger can hardening big shaft which diameter within 250, also can hardening

Gear wheel diameter within about 500 and 800.

1.hardening parts of automobile, motorbike, mold, agricultural machinery.

2.hardening machinery parts, such as: all kinds of gear wheel, chain wheel, kinds of axis, pin.

3.hardening the industrial of machine tool, such as : bed guide way of machine tool.

4.heat treatment pliers, spanner, screwdriver, drill, axe

5.hardening pin, piston ring, spring pin, valve, shifting fork.

6.all kinds of track spiker.

Specifications:

Model: WH-VI-120
Output power: 120KW
Input voltage: three phase 380V 50-60HZ
Oscillation frequency :15-25KHZ
Size: main 650 × 480 × 1440mm
At 500 × 800 × 580mm