Home  >  Metal Processing Machinery  >  Machine Tool Equipment  >  Welding Equipment  >  Other Welding Equipment

1. BGA Rework station with Optical alignment system, 2. 3 independent heating zones, 3. PLC control, 4. CE certificate - details see: https://www.machineto.com/bga-rework-station-with-optical-alignment-system-10138205

BGA Rework station with Optical alignment system

Features:

1.Embedded Industrial PC, high definition touch screen interface, PLC control, and instant profile analysis function. Real-time settings and actual temperature profile display can be used to analyzed and correct parameters if necessary.

2.It uses precise K-type close circuit control and automatic temperature adjustment system, with PLC and temperature module to enable precision temperature control of ±2 degC. External temperature sensor enables temperature monitoring and accurate analysis of real time temperature profile.

3.V-groove PCB support for rapid, convenience and accurate positioning that fits for all kinds of PCB board.

4.Flexible and convenient removable fixture on the PCB board which protectsand prevent damage to PCB. It can also adapt to rework various BGA packages.

5.Various sizes of BGA nozzles, which can be adjusted 360 degree for easy installation and replacement;

6.Three temperature areas can independently heat and are multiple controllable and adjustable to ensure best integration of different temperature areas. Heating temperature, time, angle, cooling and vacuuming can all be set on the interface.

7.There are 6-8 levels of variable and constant temperature controls. Massive storage of temperature curves which are Instant accessible according to different BGA. Curve analysis, setting and adjustment are all accessible via touch screen. Three heating areas adopts independent PID calculation to control heating process to enable more accurate and precise temperature control.

8.It uses high powered blower to enable fast cooling of PCB board and prevent it from deformation. There are also internal vacuum pump and external vacuum pen to assist with fetching the BGA chip.

9.Including Voice "early warning" function. 5-10 seconds before the completion of uninstalling or welding, voice reminder / warning to get the workers prepared. Cooling system will start after vertical wind stopped heating. When the temperature drops to room temperature, the cooling process will stop, so that the machine will not age after heated up.

10.CE certification, with emergency switch and automatic power-off protection device when emergency happens.

Specification:

Power supply	AC220V±10% 50/60Hz
Power	6500W
Top heater	Hot air 1200W
Bottom heater	Hot air 1200W, Infrared 3900W
Positioning	V-groove, PCB support can be adjusted in any direction and with external universal fixture
Temperature control	K sensor closed loop control, independent heating
Temp accuracy	±2°C
PCB size	Max 500*400 mm Min 22*22 mm
Workbench fine-tuning	±15mm forward/backward, ±15mm right/left
Placement Accuracy	±0.01MM
Camera magnification	10x-100x
BGA chip	2*2-80*80mm
Minimum chip spacing	0.15mm
External Temperature Sensor	1-5(optional)
Machine dimension	(L*W*H): 670*770*750mm
Packing dimension	(L*W*H): 80*90*90cm
NW/GW	78/98 KG

Whole structure of BGA repair station DH-A3

Hot air nozzles:

Vocuum pen for handling BGA chip:

Packing details:

About our factory:

Advantage:

1. We're the professional BGA rework station manufacturer.

2. As we know, how to control the temperature is very important when we soldering or desoldering the bga, our machine use PID control, the data acquisition frequency of our machine is 10ms(which means every 10ms the PID will grab the data to correcting the temperature,), but for most of bga rework station from other company, their PID grab frequency is 30ms,this is a big difference between 10ms and 30ms. That’s why our machine is more accurate.

3. Fast delivery via FedEx, DHL, UPS, EMS, TNT and so on. The goods can be ready in 7 days after the receipt of the payment.

4. Payment terms: Western Union, T/T, L/C, PayPal. Please choose your most convenient one.

After-sales service:

We supply 3 years warranty for this BGA rework station , in the first year, offer spare parts for free, the other 2 years, only charge fees for spare parts, technical support is always available.

Certificates:

Should you have any request and question, please feel free to tell me. You inquiry will get our quick attention. Thank you!