Home  >  Wood Working Machinery  >  Woodworking Machinery  >  Wood Based Panels Machinery

Bangladesh Particle board production line, Chip board plant, Bagasse PB plant Capacity:100cbm/day; 30000cbm/yr. - details see: https://www.machineto.com/bangladesh-particle-board-production-line-10344436

^{Particle board production line, Chip board production line, woodworking machine, Chip board plant,linyi particle board production line, linyi chipboard line.}

^{Particle board is made from small-diameter wood, branches, wood residues and non-wood agricultural residues via Chip preparation, drying, spreading and hot press section. Finished boards can be used for furniture, building, packing, vehicle and decoration and lamination.}

^{1. Chip preparation section}

^{Raw material is reduced into qualified chips by the drum chipper, then the chips are transported to the chip silo, and then feed to the knife-ring flaker by which the chips are turned to flakes, then the flake stored in wet flake silo.}

^{2. Drying and sifting section}

^{The flakes discharged from the wet flake silo are conveyed to the rotary dryer. Qualified core flakes are stored in core flake silo; oversize flakes are send to double-stream mill to be re-crushing, and transported to surface flake silo.}

^{3. Glue regulating and applying section}

^{After scaled, the core and surface flakes are to be effectively and uniformly mixed with qualified glue independently in their glue mixers respectively.}

^{4. Forming and hot-pressing section}

^{The surface and core flakes are sent into classi-forming machine, and forming on the mat conveyor uniformly. After processes of metal remover, pre-press, lengthwise saw, cross saw, accelerate conveyor, scaling conveyor, storing conveyor and loading conveyor, mats are transported to carrier and then to hot press. Rough boards after pressing are pushed to unloader via pallet.}

^{5. Cooling and sizing section}

^{The rough board is conveyed to star-cooler for cooling, then the rough board goes through side trimming saw and become a qualified particle-board, stacked on the hydraulic lift.}

^{6. Sanding Section}

^{The board are sanded, checked and stored .}