Home  >  Construction Machinery  >  Building Material Machinery  >  Pipe Making Machinery

Automatic Machine For Both Ends Hole Turning, 1.Reasonalble price, 2.durable quality, 3.ISO approval - details see: https://www.machineto.com/automatic-machine-for-both-ends-hole-turning-10081385

Automatic Machine For Both Ends Hole Turning

1.Main parameters

Spindle Center Of machine tool--------------------900mm

Outer dia. of steel pipe -----------------------φ89~φ219mm

Length of steel pipe-----------------------200~2600 mm

Spigot depth -----------------0~60 mm

Speed of movement of slide seat -------------------------2m/min

Rotate speed of Spindle --------------------------250,390r/min

Cutting depth -------------------------------0~3 mm

Feeding speed-------------------Hydraulic stepless adjustable

Main driving motor -----------------11KW ,970 r/min

Workpiece clamping motor -----------------3KW 1450r/min

Oil pump motor -----------------------2.2 KW ,960 r/min

The hydraulic system working pressure -------2.5~4Mpa Rate of flow0~25L/ min

Weight of machine--------5000 Kg

2.Machining accuracy

Two hole diameter size accuracy (measuring on machine)is not less than IT9

Size changing of two check mouth bottom transverse spacing≤0.20

cutting surface roughness Ra 3.2-6.3.

Following is common questions you may met when operation, just for your reference.

Fault Phenomenon	Fault reason	Exclusion methods
1.High oil temperature	a.Less oil in the fuel tank b.Bad fuel tank ventilation	a. fuel up b.Fuel tank ventilation
2. Large noise cause bubble	a. Oil filter plugging b.Oil suction pipe and joint inhaled air	a.Clean the oil filter b.Fastening the oil suction pipe and joint or the oil level is lower than the oil filter should be refueling
3. The oil pump overheating	The oil pump wear and damage	Repair, replacement of oil pump

We should be grateful for your inquriy and trial order. Thank you.