Home  >  Packaging Machinery  >  Labeling Machines

1. Automatic Labeling machine for square bottles, 2.High speed, 3.Flat labeling, 4.High quality, 5.Perfact design - details see: https://www.machineto.com/automatic-labeling-machine-for-flat-surface-plain-labeling-machine-10058219

Brief Introduction of Automatic Labeling Machine for flat surface plain labeling machine

The automatic flat labeling machine is the new generation of packaging equipment. It is special designed based on the automatic labeling machine technology and technical requirements. Can make the adhesive labels stick on the bottle surface smooth and tidy. Labeling process is stable and reliable, and labeling position can reach the ideal requirements.

The automatic flat labeling machine belongs to the electromechanical integration products with reasonable structure. It is used to rolling the adhesive label on the round bottles automatically, when there is lack of bottle, the control system will stop offering the labels, which can avoid the label paper waste effectively, and can adjustment stepless according to the scale of the bottle and the label characteristics.

The Features of Automatic Labeling Machine for flat surface plain labeling machine

1. Suitable for labeling on the flat surface of various products.

2.Controlled by the stepping motor, adopts Keyence fiber made in Japan to ensure the labeling accurate and in high quality.

3.Dispense special training, the workers can operate and maintenance the machine easily after the simple guidance. The electrical components are all standardization parts, when something is broken, you can purchase them anywhere, the daily maintenance and management are also convenient.

4. The whole machine adopts SUS304 stainless steel and T6 aluminum alloy materials, parts and components adopt standardized design, fully comply with GMP environmental requirement.

The Main Parameters of Automatic Labeling Machine for flat surface plain labeling machine

1. Voltage: AC110V;50/60HZ

2. Power: 180W

3. Speed: 0-240 pcs per minute (according to the size of the product and the label)

4. Accuracy: ±1mm (according to the surface evenness of the product)

5. Suitable range of the products: Length 30mm-300mm, Width 30-260mm

6. Suitable range of the labels: Length 20mm-300mm, Width 15mm-120mm

7.Specification of the label roll: Outer diameter: 300mm, Inside diameter: 76mm

8.Overall dimensions: 2000mm×650mm×1300mm(L×W×H)

9.Weight: 250 Kg

Operating Principle of Automatic Labeling Machine for flat surface plain labeling machine

When the product is put to the conveyer manually, the conveyer will send the product to the photoelectric sensor area, when the photoelectric sensor get the signal, it will feedback the signal to the system, after receiving the signal, the stepping motor will send out the label, and stick the label on the surface, another photoelectric sensor will limit the sending of the next label on time. When the bottles are sent continuously, the labels are sent out one by one, and label on the surface correctly, after stick the labels on the surface, the brush will smooth the label and ensure the labels stick on the product tightly and smoothly, then the product will be automatic output, the labeling process is finished.

Operation Procedure of Automatic Labeling Machine for flat surface plain labeling machine

1. Fix the label roll on the machine according to the graphical representation, adjust the height of each part.

2. Check if all the position of the labels are correct.

3. Adjust the distance between the two rails, the distance between the brush and the conveyer, make sure the distance is suitable for the product to pass.

4. Turn on the power switch, turn on the optoelectronic switch.

5. Turn on switch of the motor and label sending device, debug labeling, if there are any abnormal, get rid of them.

6. Adjust the labeling position.

7. Ensure the test is OK, then operating the machine normally.

8. Power off.

How To Check The Sensitivity Of The Photoelectricity of Automatic Labeling Machine for flat surface plain labeling machine

1.Turn on the power, at the same time the power indicator of the photoelectric amplifier inside the chassis light on. Set the three control key to the bottom. The manufacturer has debugged before.

2. Adjust the sensitivity of the photoelectricity: This amplifier has reaction different regions in different working environment. Find out the highest and lowest reaction area, put a analyte before the photoelectric sensors, then rotate it to positive direction until the red light and green light up, this position is the highest point of the reaction area. Then rotate it to reverse direction rotate until the red light and green light go out, this position is lowest point of the reaction area.

3. The photoelectric for peel the label has been adjusted by the manufacturer, there is no need to adjust it in most cases.

Adjust the depth of parallelism of the label peel board Of The Photoelectricity of Automatic Labeling Machine for flat surface plain labeling machine

The purpose is to make the peel board paralleled with the product and the conveyer, so as to labeling the labels correctly.

Announcements of the label peel board Of The Photoelectricity of Automatic Labeling Machine for flat surface plain labeling machine

1. The machine adopts Power Supply of AC 220V. Please make sure the earth wire be connected when working and check if all the parts fixed at the right place before plug in the power supply.

2. Please pay attention that if the direction of labels is suitable for the machine. There are two working ways of labeling machine: in at the left and out at the right or in at the right and out at the left. It can be made according to customers’ requirement

3. The guide rings at the bottom of guide wheel should be at the same level, and the above guide ring should be pushed to the edge of label.

4. Ensure the labels are pulled smoothly.

5. Make sure the electric eye at the right place, or it will be crumpled when labeling.

6. Ensure the bottles sending channel is smooth.

7. Ensure the routine of labels is correct.

Labeling machine electrical configuration list Automatic Labeling Machine for flat surface plain labeling machine

Equipment model	Name	Brand	Producing area
Auto notebook labeling machine books labeler flat surface labeling on books	Fiber amplifier	Keyence	Japan
	Touch screen	Weinview	Taiwan
	PLC	Delta	Taiwan
	Motor speeder	Gaoke	Zhejiang
	Relay	Omron	China
	Stepper motor driver	BMW	Joint venture
	Stepper motor	BMW	Joint venture
	Reducer motor	Zhongda	Zhejiang
	Motor gear box	Zhongda	Zhejiang
	Indicator light	Apt	Shanghai
	Button	Shuangke	China
	Switch power	Chuanglian	Changzhou

Pictures show for reference Automatic Labeling Machine for flat surface plain labeling machine