Home  >  Raw Material Processing Machinery  >  Paper Product Making Machinery

This combo 1000 automatic rewinder series is suitable to produce jumbo bathroom tissue rolls, and jumbo hand towel rolls used in - details see: https://www.machineto.com/automatic-jumbo-tissue-rolls-rewinder-10333870

This combo 1000 automatic rewinder series is suitable to produce jumbo bathroom tissue rolls, and jumbo hand towel rolls used in both center-pull and auto-cut dispensers. It takes little time and effort to set up the machine to produce any of these three products.

The premade cores are manually fed onto expandable air shafts on which the machine will rewind the tissue web after being embossed, perforated, and slit to the required final width. The unwinding of the raw material rolls is done using wide belt driving and web tension control devices for perfect material flow. The machine is capable of running 1, 2 or 3 Ply Jumbo raw material Rolls.

For safety the machine will automatically stop if any abnormalities are detected during production.

Basic Specifications:

According to customer requirements the rewinder can be built to desired raw material jumbo roll width, core, and outside diameter. Standard widths are: 1575, 1750, 2150, and 2750 mm. Core diameter: 3 inches (7.62 mm), and outside diameter of 1100 mm.

Finished roll outside diameter	90-300 mm
Finished roll core diameter	32-50 mm
Perforation length using the 4 rows of perforating blades	90-140 mm (To be specified by client)
Perforation length using just 2 rows of perforating blades	180-280 mm (To be specified by client)
Linear Speed	Up to 200 m/min variable by frequency convertor
Raw material jumbo roll loading	Automatic by special pneumatic air pistons system
Rewinding	Using expandable air shafts
Standard Power Supply Requirement*	3 Phase, 380 volts, 50 Hz. Neutral plus good earth.
Compressed air requirement*	3 HP with minimum capacity of 4 kg/cm2
Power Consumption**	4.5-11 KW
Dimensions (L x W x H) **	6200 x 2600 x 1800 – 6200 x 4000 x 1800 mm
Weight **	3800-9000 Kg

*Power and compressed air supplies should be provided by client. **Variable depending on machine size, configuration, and options.

A wide range of options are available upon request, such as: Special embossing units, edge embossing units, special power supply requirement tail suction unit, and tail sealing unit.

Note: Detailed specifications will be provided upon client request.