Home  >  Metal Processing Machinery  >  Metal & Metallurgy Machinery  >  Metal Forging Machinery

Cold Forging Machine:, 1. Blank diameter range:2-8mm;, 2. Blank length range: 10-70mm;, 3. Equiped with 4-die 4-blow; - details see: https://www.machineto.com/automatic-high-speed-4-die-4-blow-cold-former-multi-station-screw-bolts-making-machine-10165544

Automatic High Speed 4-die 4-blow Cold Former / Multi-Station Screw / bolts Making Machine

This machine make various fasteners especially for auto parts including the non-standard parts & special-shaped pieces etc.

1.Apply and Features:

(1)4-Die 4-Blow machine series adapt pneumatic clutch breaking system, its trigger current is lower that may apply on inching operation and single stroke / continuous operation. The advantages are: reduce trial run time, and optimizing operation space the main slider plate stops at rear position when machine stop working.

(2)This machine series all adapt inverter for stepless speed change.

(3)This machine series, all main mechanical parts especially machine body and main slider plate were been normalized after casting. The purpose is to eliminate the stress remained in the parts which would prevent parts deformed and retain manufacturing precision for longer period.

(4)The feeding system adapts pneumatic cylinder to hold material, its air pressure is adjustable that would lower varies diameter and material wearing while the feeder return. The feeding switch is no time limit, so there won’t be feeding abnormal to be occurred. When feeding material is short of dimension, machine would auto stop upon this abnormality. The feeder roll equipped with a stopper to prevent material reverse.

(5)The cutter of cut-off system adapts fully surround cut, the cross section is smooth and perpendicular. Cutter slider is centered with cutter rod that provides a perfect and stable cutting process. Regards adjustment, the orientation of cutting plate doesn’t need to use cushion, it is simple and accurate.

(6)Rear K.O. system is adapting a swing arm system, and the K.O. cam stroke is adjustable. The final Die is changeable to Hex trimming cam. Cam plates are accurately processed by C.N.C. would enhance smoothing stroke and stableness of K.O. acme.

(7)Front K.O. system, the punch of K.O. system, the K.O. cam is accurately made to let K.O. rod acting with the main slider plate back-off simultaneously, so the work-piece would completely stay in the Die further preventing the work-piece carrying out by punching tool in order to complete next step. All 4 sets of punch are able to perform K.O., and can be adjusted independently.

(8)Grip system, the grip cam is precisely made by C.N.C. for it to be a conjugate cam. The material is bearing steel through normalizing and high frequency heat treatment, its hardness is HRC58°~61°. Grip holder track transforming without gaps, reduces machine operation burden, increase reliability. The grip holder slider and slider track, all surface are treated with high frequency heat, then highly precision grinded. The grip holder track can be precisely adjusted that assures working stableness and higher reliability. Centering the grip arm is simple. Adapt gear box to flip Grip holder (HH-84 model or higher level).

(9)There is option of grip system that adapts pneumatic cylinder stand, the grip arms are individually operating and it is able to adjust gripping pressure upon the wire size and weight. Clipper is changeable to nut type. Base on working procedure of the work-piece, you can flip or transfer it levelly.

(10)Auto-check equipment:

Inverter abnormality; Rear K.O. abnormality; Current over load; Material short of feeding size; End of material; Counter setting; Lubrication pressure low; Pneumatic pressure low; Grip stand floating; RPM LCD display

2.Technical Specifications:

Model		TX-4.4
Forging Station (Nos.)		4
Max. Cut-off Dia.(mm)		8
Max. Cut-off Length (mm)		90
Static Die Ejection Length C (K.O Stroke)		74
Dynamic Die Ejection Length (mm)(P.K.O Stroke)		15
Cut-off Die Size (mm)		Φ22*40
Static Die Size / Main Die Size.(mm)		Φ46*100
Dynamic Die Size / Punch Die Size (mm)		Φ31*80
Static Die Center Distance / Die Pitch (mm)		53
Main Slider Stroke (mm)		120
Screw Size can be made(mm)	Max. Size	M8*70
	Min. Size	M2*10
Max.Output(Pcs./Min.)		180
Main Motor(Kw)		7.5
Weight (Kg)		9500

3.The photoes for other kinds of cold forging machines:

4.Our factory and office show:

A.Factory and office:

B.Our Workshop Show:

C.Machines' accessories show:

5.Customers Scene:

(1)In 2011,we manufacture 300 sets screws cold heading machine & thread rolling machines for Asia's biggest screw manufacturer Gem-Year Group,and we make over 600 sets cold heading machine, thread rolling machines for it's branch company--Gem-Duo company,we have been highly praised by our clients due to the good quality and perfect performance of our machines.

(2) In 2012,we manufacturer 50 sets screws cold heading machine and thread rolling machines for United Industry Company and United Mechanical Corp in Vietnam,and in July 2012,our vice General Manager Mr.Deng visited these two companies to train their employees how to debug the screw machines.

6.Customrs Visit:

Any enquires or questions on theAutomatic High Speed 4-die 4-blow Cold Former/Multi-Station Screw/bolts Making Machine,please don't hesitate to contact with me as below:

Kennith

Tel:86-769-83485996

Mobile:86-13612732527

Fax:86-769-83031396

Skype:hs.2212

TradeManager ID:dltxwj